
Fill Dirt Delivery in Orlando, FL
Bulk fill dirt delivered in Orlando, FL. Brown color.
Starting from $485.56 delivered to Orlando for 2 tons, our minimum order
Orlando yards and job sites rarely sit at the grade the plans want. Low spots collect water, new slabs need a raised pad, and old pool excavations need filling. If that sounds like your project, fill dirt delivery in Orlando, FL is the straightforward fix: you pick the amount, enter your ZIP, and the truck brings it to the address. This page covers what the material does, how to size an order, and how pricing works. For the wider picture, see Fill Dirt in Florida.
Fill dirt delivery in Orlando, FL: what you are buying
Fill dirt is plain brown earth sold for raising and leveling ground, not for growing anything. It packs down into a stable base, which is the whole point. Orlando is a city of about 320,000 people spread across a lot of flat, low-lying land, so grade changes are a routine part of building and repair work here.
Every load is sold by the ton. One ton is 2,000 lb, and the smallest order is 2 tons.
Common jobs around Orlando
- Raising a building pad. Garages, sheds and small additions sit better on compacted fill than on soft native ground.
- Filling low spots. Yards that hold standing water after a summer storm can be built up so rain runs off instead.
- Backfilling. Trenches, retaining wall backs, old tank holes and removed pools all need something solid to go in.
- Driveway and path subgrade. Fill goes under the stone, not on top of it.
- Rough grading. Smaller lots can be shaped before sod or topsoil goes down.
Fill dirt is a base layer. If you plan to plant lawn or beds on top, finish with a layer of Premium Screened Topsoil. A stone layer such as Pea Gravel works for walkways and drainage areas, and the same delivered, by-the-ton ordering applies to both.
How to work out the amount you need
Start with the footprint of the area. Multiply length in feet by width in feet, then by the depth you need in inches, and divide the result by 324. That gives cubic yards. Our fill dirt runs about 2,200 lb per cubic yard, so a yard weighs a little over a ton. Multiply cubic yards by 1.1 for a rough ton count.
A worked example: a low corner of a backyard measuring 20 ft by 15 ft that needs 6 in of fill comes to about 5.6 cubic yards, or roughly 6 to 7 tons. Fill settles after it is placed and compacted, so add a cushion of 10 to 15 percent. Rounding up is cheaper than ordering a second small load.
If you would rather not do the arithmetic by hand, the calculator handles the conversion for you. It is built for gravel drives, but the length, width and depth logic is the same for a fill area.
Delivery to your Orlando address
Enter your ZIP and the page shows the delivered price for that location. Details on how drop-offs work are on the page for delivery in Orlando. Kissimmee, about 17 miles away, is the nearest city we list, and its orders are handled through the same ordering flow.
Plan for truck access. The driver needs a clear approach and room to tip the load. Tell the driver where you want the pile when you place the order, and keep it off septic fields and soft turf if you can. A tarp is smart if rain is in the forecast, because wet fill is heavier and harder to spread.
How pricing works
There is no price list to decode. The price you see is the delivered total for your ZIP, calculated live. Larger orders get a lower rate per ton, so if you have a second project coming up, a single bigger load can cost less per ton than two small ones.
Because the number depends on where the material is going, we do not publish a single citywide figure. Enter your ZIP on the product page and the current price appears.
Placing the order
- Work out your tons, adding a cushion for settling.
- Enter the delivery ZIP to see the live delivered price.
- Set the quantity, remembering the 2 ton minimum.
- Add the site notes the driver needs, such as gate width and where to place the pile.
- Check out and wait for your confirmation.
Fill dirt ordered by the ton is a practical way to get a Florida yard back to grade without renting a trailer or making repeated runs.
About Fill Dirt
Fill dirt is a general-purpose brown earth used to build up and level ground before the final surface goes on. It is mostly mineral soil with a mix of fines and some small stones, and it is not screened or amended, which is why it costs less than topsoil. Its job is to give you something solid to build on.
It compacts well when placed in layers, so it suits pads, backfill and low-spot repair. In Orlando, fill dirt is not meant for planting. Grass and garden beds do better with a layer of screened topsoil spread over the compacted fill.
This material is sold by the ton, and a cubic yard weighs about 2,200 lb. The delivered price for your ZIP appears on the page, and bigger orders get a lower rate per ton. Fill dirt orders in Orlando start at 2 tons.
What Fill Dirt costs in Orlando
Around Orlando, fill dirt is quoted by the ton with delivery layered in based on distance from the closest yard. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. Plan on roughly 98 sq ft of coverage per ton at 3 inches deep, which puts a single-car driveway in the 4 to 7 ton bracket.
How crews use Fill Dirt in Orlando
Orlando contractors keep fill dirt on the order sheet for a short list of standard installs. Top of the list is erosion control, where the material is rolled out in tight urban lots and infill builds and screeded to grade. Right behind that is driveway gravel, common in dense neighborhoods where curb access is short and often paired with edging or fabric below the lift. Orlando sits at about 320,742 residents, which means we see steady weekday traffic from landscape crews and weekend pickups from owner-builders.
Delivery day in Orlando
Delivery in Orlando runs out of the nearest pit; you get a two hour arrival window the evening prior and a call when the driver leaves the scale. Plan for 12 ft of clear path for a tandem and 14 ft for a tri-axle, plus a level area at the dump point so the bed lifts straight. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in Orlando
Price by ZIP- SizeScreened, no size grade
- Density2200 lb/yd³
- ColorDark brown
Price by ZIP- Density2000 lb/yd³
- ColorDark brown
Price by ZIP- Density1000 lb/yd³
- ColorDark brown
Estimate how much you need
Work out your material
A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.
Browse more
Common uses for Fill Dirt in Orlando
Available in nearby cities
Plan your project
Related guides
GUIDEWhat Are Screenings? A Guide to Crushed Stone FinesScreenings are fine crushed stone used for paver bases, joint fill and walkways. See what screenings are, common types, and mistakes to avoid.Read guide →
GUIDEWhat to Put Under River Rock for Landscaping BedsHere is what to put under river rock landscaping: a compacted base where needed, then landscape fabric, then rock, to stop weeds and settling.Read guide →
GUIDEHow to Clean River Rock and Restore Its ColorLearn how to clean river rock landscaping with rinsing, soap and vinegar methods, plus common mistakes to avoid for a brighter, longer lasting rock bed.Read guide →
GUIDEHow to Lay a Gravel Driveway: Step-by-Step GuidePractical, field-tested guide: how to lay gravel driveway. Pulled from real US installer notes and 2026 supplier price data.Read guide →Frequently Asked Questions
How much fill dirt do I need for a small Orlando yard project?
For an Orlando fill job, multiply length by width in feet, then by depth in inches, and divide by 324 to get cubic yards. Multiply that by about 1.1 for tons. Add 10 to 15 percent so the fill still reaches grade once it settles. A calculator on the site can do the conversion if you prefer.
Can I plant grass directly in fill dirt?
It is better not to. Fill dirt is made for building up and leveling, and it holds few nutrients. Compact it first, then spread a few inches of topsoil over it before seeding or laying sod. That gives roots a proper bed and keeps the fill doing its structural job underneath.
Is there a minimum order for fill dirt in Orlando?
Yes. Orlando fill dirt orders begin at 2 tons. Anything above that can be ordered in the quantity you need. Larger orders get a lower rate per ton, so if you have extra grading planned, it can pay to combine it into one load.
How do I see what delivery will cost to my address?
In Orlando, enter your ZIP on the product page. The delivered price for that location is calculated live and displayed right there, so you see the real figure before checkout. The price covers the material brought to your site, and it can differ from one ZIP to another.
What does a ton of fill dirt cover?
About a ton covers roughly 0.9 cubic yards. Spread 4 inches deep, that is around 75 square feet of ground. Fill varies in moisture, so wet loads weigh more and cover slightly less. Ordering a little extra avoids a second delivery.
Should fill dirt be compacted?
Yes, for anything that will carry weight. Place it in layers of about 6 inches and tamp or roll each one. Compacting reduces settling later. For loose decorative areas, light raking is usually enough, but pads, slabs and driveways need real compaction.
Where will the driver put the pile?
The driver tips the load where you ask, as long as the truck can reach it safely. Mention gate width, overhead lines and soft ground when you order. A flat, firm spot close to the work area saves hand-moving later.
Can I order other materials along with fill dirt?
Yes. Topsoil, pea gravel, river rock and crushed stone are also available for Orlando addresses. Each one is sold by the ton with its own delivered price shown for your ZIP, so you can match the base layer and the finish layer to your project.