Fill Dirt Delivery in Killeen, TX by the Ton

Killeen sits in Bell County on the edge of Fort Cavazos, and a lot of its building is the ordinary kind: slab pads, fence lines, drainage corrections and backyards that need to be brought back up to grade. For that work, fill dirt delivery in Killeen, TX is a matter of picking a tonnage and letting the truck drop it at your address. This page covers what the material does, how to estimate the load and how ordering works. The statewide overview is on Fill Dirt in Texas.

Fill dirt delivery in Killeen, TX

With a population of about 156,000, Killeen has plenty of lots where the ground was cut or eroded and now needs rebuilding. Orders are shipped to your address and priced for your ZIP. If you want to check how routes and drop-offs work for the area, see delivery in Killeen. Round Rock, about 42 miles away, is the nearest city we list, so most Killeen orders are planned around Killeen itself.

Turning measurements into tons

Start with the footprint of the low spot. On a Killeen fill dirt job, multiply length in feet by width in feet by the depth in inches, then divide by 324 to get cubic yards. Because fill dirt is bought by weight, convert that figure to tons by multiplying by about 1.1. A 20 by 30 foot pad raised 6 inches comes to roughly 11 cubic yards, or around 12 tons.

If the shape is irregular, split it into rectangles and add them. If you would rather skip the paper math, the calculator takes your dimensions and returns a figure.

Plan for the pile to shrink once it is wet and tamped. Dirt placed loose settles noticeably, so many people order a little over the figure for anything that will carry a slab or a vehicle.

Where Killeen jobs put it to use

• Raising a building pad before pouring a slab for a shed, garage or addition.
• Backfilling around foundations, retaining walls and utility trenches.
• Regrading yards so water runs away from the house and not toward it.
• Filling holes left by removed trees, pools or old septic tanks.
• Base layers under sod or topsoil where the existing ground is too low.

Bell County soils lean toward clay, which swells and shrinks with moisture, so fill that is properly compacted stays put instead of sinking into a bowl later.

A second worked example

Say you are closing a trench along a 60 foot fence run, 2 feet wide and 18 inches deep. That is 60 times 2 times 18, divided by 324, or about 6.7 cubic yards, which lands at roughly 7 to 8 tons once converted. Trenches take up more material than they appear to, because the earth you dig out is fluffier than the earth you put back.

What to check when the load arrives

Look at the pile as it is tipped. It should be brown, free of trash, roots and chunks of concrete, and mostly crumbly. A few stones are normal. If something looks wrong, photograph it before you spread any, and contact the team that same day. Spreading a whole load first makes any problem hard to sort out afterward.

Finishing the surface

Fill dirt gets you to grade. For a lawn, add a layer of Premium Screened Topsoil on top, which is a separate order and is sold by the ton as well. For a drive or a walkway base, a stone such as Pea Gravel is the usual choice for the finished surface.

How pricing works

Fill dirt is sold by the ton. Enter your ZIP on the product page and the delivered price is calculated live for that address, so you see the real number before you commit instead of a rough range. Larger orders get a lower rate per ton, which makes a single big delivery cheaper than several small ones. A Killeen fill dirt load begins at 2 tons.

Placing the order

Choose Fill Dirt, enter the Killeen ZIP, set the number of tons and check out. Tell the driver where the pile should go through the order notes, and keep the access path clear of cars and low branches on the day.

About Fill Dirt

Fill dirt is general-purpose brown earth used to build up, level and backfill. It is sold here by the ton, and a cubic yard of it weighs roughly 2,200 lb, a little over a ton. It is not screened topsoil, so expect some clay, sand and the occasional small stone rather than a fine, uniform texture.

That makes it a base material. It packs down well in layers, holds a grade, and costs less than amended soil, but it is not meant to grow a lawn or a garden on its own. Plan on covering the top few inches with topsoil if you want grass or plants. Fill that is clean and free of trash is what you should expect on your site, and a quick look when the load is tipped lets you confirm that before you spread it.

What Fill Dirt costs in Killeen

In the Killeen market, fill dirt is sold by the ton and priced at the gate before delivery is added on. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. One ton covers about 98 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons.

How crews use Fill Dirt in Killeen

Crews working out of Killeen tend to call for fill dirt on a few repeat jobs each week. The first is erosion control, typically laid in tight urban lots and infill builds with a base lift compacted before the finish course goes on. The second is driveway gravel, which lands here in dense neighborhoods where curb access is short and usually ships as a 4 to 8 ton order. With a population around 156,128, Killeen pulls a mix of single-truck homeowner orders and contractor full-loads through the season.

Delivery day in Killeen

On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other Killeen stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

Estimate how much you need