Pea Gravel Delivery in Auburn, WA by the Ton

Pea gravel delivery in Auburn, WA suits homeowners who want a clean, rounded stone for garden paths, drainage trenches and the edges of planting beds. We sell it by the ton and bring it to your property in bulk, so one order can cover a long walkway or a full dry creek bed instead of a stack of small bags.

Pea Gravel Delivery in Auburn: Local Overview

Auburn is part of the Seattle-Tacoma-Bellevue metro area and has roughly 85,000 residents. Lots here range from compact city parcels to larger properties with room for a dry creek bed, and the stone suits both ends of that range. Many yards combine lawn, shrub beds and narrow side yards, and pea gravel fills those strips well where grass struggles in shade or along a fence line.

Nearby towns include Tacoma (about 11 miles away), Burien (about 13), Renton (about 14), Kent (about 15) and Federal Way (about 16). For the statewide view, see Pea Gravel in Washington.

Best Uses for Pea Gravel Around Auburn Homes

• Garden paths that run between raised beds
• Dry creek beds that carry runoff from downspouts
• Drainage trenches along a foundation or patio edge
• Borders for shrub and perennial beds

The tan and mixed color works with brick, cedar and stucco alike, and the even size makes a neat surface that is simple to rake. Where the ground slopes toward the house, shape a trench so water runs to an outlet at the low end rather than pooling against the foundation. Gardeners who plant near a path often top the open soil with Mulch around the shrubs, and they bring in Premium Screened Topsoil to lift low spots before the stone goes down.

A common plan pairs a path about 3 feet wide with a planted border on one side. That gives walkers a firm line and gives the bed a crisp edge. Straight runs look tidy, but a gentle curve works well too, as long as the border holds the stone in place along the outside of the turn.

How Much Pea Gravel to Order for an Auburn Project

Pea gravel is sold by the ton, and one ton covers a little under three-quarters of a cubic yard. Start by multiplying length by width in feet, then multiply by depth in inches and divide by 324 to reach cubic yards. Convert to tons by multiplying the yards by 2,800 lb per cubic yard and dividing by 2,000 lb per ton. Measure curved edges with a string line instead of by eye, since a bed that looks rectangular from the porch often bulges out a few tenths of a yard.

Add about a tenth more for settling, because the stone shifts a little under foot and as the surface is raked flat. Then check your numbers in the calculator before you settle on a tonnage.

Pricing Notes for Pea Gravel Orders in Auburn

The delivered price for your ZIP is shown on the page before you check out. Larger orders get a lower rate per ton, which makes a long path plus a border cheaper per ton than two separate small orders would be. If your project has a few distinct areas, adding them to one order is the simplest way to bring the per-ton figure down.

Some owners split a large project into phases to spread out the spending. That works, but a second load added later can leave a visible seam where the two batches meet, so planning the full tonnage up front usually gives a more even result.

Ordering Pea Gravel for Delivery to Auburn

Enter your ZIP, pick a tonnage and review the delivered price. Before you place the order, choose a drop spot that sits close to the work area and keep a clear, firm route from the street to it, since the stone is heavy and the truck needs room to set it down. Full details on delivery in Auburn are on the city page.

About Pea Gravel

About this material

Pea gravel is a water-worn stone sized roughly 1/4 to 3/8 inch, with a tan and mixed color that looks warm in full sun and quiet under shade. The pieces are rounded rather than broken, so they settle into a surface with no sharp corners and no interlocking points.

The stones leave open gaps between them, so rainwater passes down through the layer instead of standing on top. That open structure is the reason the stone shows up so often in trenches and dry creek beds. Pea gravel does not decay the way wood chips do, so the surface keeps its look for years with occasional raking. It is a finished surface rather than a load-bearing base, which matters when you plan a project that has to carry weight.

Because the stone is uniform in size, a layer raked flat looks even from end to end, and a bed edged with a hard border holds its shape well. Tan and mixed tones blend with most home exteriors, from painted wood to brick, so the stone rarely clashes with the house or the fence line next to it.

What Pea Gravel costs in Auburn

Around Auburn, pea gravel is quoted by the ton with delivery layered in based on distance from the closest yard. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. Plan on roughly 77 sq ft of coverage per ton at 3 inches deep, which puts a single-car driveway in the 4 to 8 ton bracket.

How crews use Pea Gravel in Auburn

Auburn contractors keep pea gravel on the order sheet for a short list of standard installs. Top of the list is patio gravel, where the material is rolled out in tight urban lots and infill builds and screeded to grade. Right behind that is walkway gravel, common in dense neighborhoods where curb access is short and often paired with edging or fabric below the lift. Auburn sits at about 85,513 residents, which means we see steady weekday traffic from landscape crews and weekend pickups from owner-builders.

Delivery day in Auburn

Delivery in Auburn runs out of the nearest pit; you get a two hour arrival window the evening prior and a call when the driver leaves the scale. Plan for 12 ft of clear path for a tandem and 14 ft for a tri-axle, plus a level area at the dump point so the bed lifts straight. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

Estimate how much you need