Fill Dirt Delivery in Jonesboro, AR by the Ton
Fill Dirt · Jonesboro, AR

Fill Dirt Delivery in Jonesboro, AR by the Ton

Bulk fill dirt delivered in Jonesboro, AR. Brown color.

Starting from $472.51 delivered to Jonesboro for 2 tons, our minimum order

Weight per yard 2200 lb Density 81.5 lb/cu ft

Fill dirt delivery in Jonesboro, AR suits projects where the ground has to come up before anything else can happen: a backyard that sits low, a footing area that needs more height or a utility cut that has to be closed. MyGravelBuddy sells Fill Dirt by the ton and delivers to Jonesboro addresses in bulk.

Jonesboro sits in northeast Arkansas on Crowley's Ridge and is home to Arkansas State University, with about 80,000 residents. The flatter ground that stretches out from the ridge can hold rainwater, so much of the local fill work comes down to bringing a yard up and letting water leave it. Buyers include homeowners reshaping a lot and small contractors working on residential pads, driveways and utility backfill.

For a wider view of the material, the Fill Dirt in Arkansas state page is a good place to start.

Planning a Jonesboro Fill Job

Many Jonesboro lots were graded when the house went up, and the ground around it has shifted or sunk in the years since. Keep a simple sketch of the lot with the low areas marked, along with any spot that will get a patio, a slab or planting. Those notes show whether one order can cover several problem areas or whether the work needs to be split into separate orders. Working from a sketch also makes it easier to explain the job to whoever is spreading the fill.

Hauling Fill Yourself in Jonesboro

Hauling fill yourself means loading a pickup or trailer again and again, and every trip adds time at the yard and at home. A single bulk delivery puts the whole order in one place and cuts out the repeated loading. It also keeps the material in one pile, which is easier to grade than several small piles scattered across the yard. Most of the work after the drop is spreading and grading, and that goes faster with a wheelbarrow and a steel rake kept close by.

Homeowners new to fill work often ask how much the new ground will stand out from the old. A properly graded fill layer blends into the existing lawn once the finish layer and sod are in place, so the real skill in the job is getting the levels right before anything green goes down.

Working Out Your Fill Dirt Volume in Jonesboro

Multiply the area's length and width in feet by its depth in inches, then divide by 324 to get cubic yards. Fill sinks a little as it packs under its own weight and under foot traffic, so build in a small extra allowance before converting the figure to tons. The calculator on our site runs the conversion, and it is a quick way to double-check a hand calculation.

Ordering Fill Dirt for Jonesboro Delivery

Fill Dirt is sold by the ton. Enter your ZIP and the tonnage, and the delivered price for that address appears before you check out. Larger orders drop to a lower rate per ton, so a bigger grading job costs less per ton than a small top-up. For Jonesboro fill dirt, two tons is the smallest order you can place.

Drop Spot and Access at Your Jonesboro Address

Choose a spot the truck can reach and that is firm enough to carry it. Keep the drop clear of sprinkler heads, septic components and tree roots you do not want disturbed. After heavy rain, a soft yard can take ruts, so a dry day gives a cleaner drop. Our delivery in Jonesboro page covers how orders reach the city.

Common Fill Dirt Projects Around Jonesboro

Some of these projects finish with Premium Screened Topsoil, which is sold by the ton. Mulch is a different product, sold by the cubic yard, and it works well on top of planted beds.

About Fill Dirt

This Fill Dirt is brown, unscreened subsoil that suits bulk filling jobs: leveling a yard, raising a footing area or refilling a trench. It is not a planting medium, so it belongs under the finish layer rather than at the top of a bed.

Sold by the ton. Each ton weighs 2,000 pounds, and a cubic yard of this material is about 2,200 pounds, so the two units land close together. Natural soil varies from load to load in color, dampness and texture, and it may carry small stones and roots, which is normal for a material that has not been screened.

Remove wood, leaves and other organic debris from the area before the load arrives, since those break down and leave voids that show up as dips later.

What Fill Dirt costs in Jonesboro

In the Jonesboro market, fill dirt is sold by the ton and priced at the gate before delivery is added on. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. One ton covers about 98 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons.

How crews use Fill Dirt in Jonesboro

Crews working out of Jonesboro tend to call for fill dirt on a few repeat jobs each week. The first is erosion control, typically laid in tight urban lots and infill builds with a base lift compacted before the finish course goes on. The second is driveway gravel, which lands here in dense neighborhoods where curb access is short and usually ships as a 4 to 8 ton order. With a population around 82,384, Jonesboro pulls a mix of single-truck homeowner orders and contractor full-loads through the season.

Delivery day in Jonesboro

On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other Jonesboro stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

SAME CATEGORY

Related materials we deliver in Jonesboro

Estimate how much you need

Work out your material

Cubic yards0 cu yds
Approximate weight0 tons

A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.

PRODUCT & CITY HUBS

Browse more

NEARBY

Available in nearby cities

TOOLS

Plan your project

KEEP READING

Related guides

Frequently Asked Questions

Will fill dirt fix a yard that floods after storms?

Fill can raise a low spot, but it does not change where the water comes from. If runoff arrives from a downspout, a driveway or a higher neighbor's lot, the fix may need a swale, a drain pipe or regrading across a wider area. A short walk around the yard after a storm shows where water runs and how much fill the spot really needs.

Does fill dirt drain well once it is in place?

It depends on the mix. Heavy clay drains slowly, while sandier material lets water move through more freely. Because this is natural subsoil, drainage can vary from load to load. If a spot must drain fast, a layer of crushed stone under the finish surface is a better choice than fill alone.

Do I need to call before digging near the fill area?

Yes, before you dig to place fill or cut a new trench, call 811 so the buried utilities near the work can be marked. Marking is free, and it protects you from striking a gas, water or electric line while you are working on the grade.

Can a homeowner order fill dirt without a contractor?

Yes. Orders are placed directly, and the price for your ZIP is shown before checkout. A contractor helps with grading plans on larger jobs, but many homeowners spread and tamp their own fill with a rake, a shovel and a hand tamper.

What happens if the load arrives wetter than expected?

Wet fill weighs more and is harder to spread, so it is best to let it drain in the pile for a day if the weather allows. Once spread, it settles more during the first rains. Expect to add a bit more material to low spots after the surface dries.

Is fill dirt the same as dirt from my own yard?

Not usually. Your yard soil may hold roots, leaves and a darker top layer that fill does not have. Digging on site can work for small leveling jobs, but if the soil is high in organic matter it will settle more over time than clean subsoil.

How do I check that the finished grade is right?

Lay a long, straight board across the area with a level on top, and check the reading at several points. Shim the low spots and rake off the high ones until the surface matches the fall you planned. A grade check at the end is the only sure way to confirm the work.

Can I put fill dirt under a concrete slab?

Fill can bring the ground up to level before the base goes in, but the slab design decides what the base must be. Many slab bases use crushed stone for a firmer, better-draining layer. Ask whoever designed the slab what they expect under it before you order.

Order Fill Dirt →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop