Fill Dirt Delivery in High Point, NC by the Ton
Bulk fill dirt delivered in High Point, NC. Brown color.
Starting from $471.52 delivered to High Point for 2 tons, our minimum order
High Point has about 114,000 residents, and many of the projects around town involve ground that has been cut, filled or left uneven during building. Fill dirt delivery in High Point, NC is a bulk option for raising that ground, and you can order it in tons with delivery to your address. Homeowners and small contractors both use it for grading, pads and backfill.
Pricing notes for fill dirt in High Point, NC
This material is sold by the ton, and the smallest order is 2 tons. The delivered price for your ZIP is calculated live, and you see it on the page before you place the order. Larger orders get a lower rate per ton, so when the job needs more material, a bigger order keeps the average cost down.
Where High Point projects use fill dirt
Fill dirt does its best work where the job is about volume rather than appearance. In High Point, that usually means leveling a sloped back yard, raising the ground around a new shed or building up a driveway edge that has washed out.
- Grading a sloped yard so the lawn sits at a usable level.
- Building up a pad for a garage, workshop or storage building.
- Backfilling trenches, foundation walls and buried utility lines.
- Repairing a washed-out driveway edge before the gravel goes back down.
Each of those jobs depends on the finished surface draining the right way. Set the final grade so that water moves away from structures rather than toward them.
Delivery to High Point, NC
High Point sits near Greensboro, about 15 miles away, and Winston-Salem is about 16 miles off. Those distances are for orientation only, and they describe the geography rather than a delivery area. For the address details that apply to this city, see delivery in High Point.
How much fill dirt for a High Point job
Write down the length and width of the area in feet, plus the depth you want in inches. Multiply the first two, multiply by the depth, then divide by 324 to find cubic yards. Plan a margin above that figure, because loose material packs down as soon as it is driven over and graded.
To turn that volume into an order, remember that each yard weighs about 2,200 lb. A ton therefore covers roughly 0.9 cubic yards, so dividing your yard total by 0.9 gives a close estimate in tons. If you would rather skip the arithmetic, try the calculator on this site.
Planning a High Point build-up in layers
Most build-ups go up in stages rather than in one pass. Fill brings the ground to a working level, and then the surface layer goes on top at its own depth. Figuring out where each stage stops is the step that most often gets skipped, and it decides how much material you need overall.
A practical approach is to mark the finished height on a few stakes around the perimeter. Measure down from that mark to the existing ground, subtract the thickness of the surface layer, and you have the depth the fill must reach. Repeat the check at the low points, where the gap is widest.
For a state-wide overview of the product, read the Fill Dirt in North Carolina hub. It is a good starting point if you are comparing options for several sites. High Point yards vary a lot from one lot to the next, so measure your own site instead of borrowing a neighbor's numbers.
Ordering fill dirt in High Point
Settle on a drop spot before delivery day. Pick ground the truck can reach without crossing a lawn you need to keep, and check for low wires, branches and tight corners. Let us know about any gate or narrow approach when you place the order.
Weather plays a part as well. Fill that is wet from rain is heavy and sticky, so spreading and grading go more slowly. A dry forecast gives you the best working conditions.
For a planted top layer, Premium Screened Topsoil is the common choice. For a surface you will walk on, Pea Gravel gives a loose, even finish.
About Fill Dirt
Fill dirt is subsoil that comes from below the topsoil layer, which is why it is unscreened and has little value for planting on its own. Crews use it for bulk work such as leveling, raising grade and backfilling against walls and trenches.
The material is a practical choice when volume matters more than texture. Its clay, sand and stone mix packs into a firm base, so the surface holds its shape once it is worked. It works best beneath a planting layer or a walking surface rather than as the finish itself.
Because it is sold by the ton, the order you place decides how much arrives. Homeowners with a single low spot and small contractors grading several lots both buy it the same way, and the material is chosen for what it does underneath the finish.
What Fill Dirt costs in High Point
In the High Point market, fill dirt is sold by the ton and priced at the gate before delivery is added on. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. One ton covers about 98 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons.
How crews use Fill Dirt in High Point
Crews working out of High Point tend to call for fill dirt on a few repeat jobs each week. The first is erosion control, typically laid in tight urban lots and infill builds with a base lift compacted before the finish course goes on. The second is driveway gravel, which lands here in dense neighborhoods where curb access is short and usually ships as a 4 to 8 ton order. With a population around 114,059, High Point pulls a mix of single-truck homeowner orders and contractor full-loads through the season.
Delivery day in High Point
On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other High Point stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in High Point
Price by ZIP- SizeScreened, no size grade
- Density2200 lb/yd³
- ColorDark brown
Price by ZIP- Density2000 lb/yd³
- ColorDark brown
Price by ZIP- Density1000 lb/yd³
- ColorDark brown
Estimate how much you need
Work out your material
A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.
Browse more
Available in nearby cities
Plan your project
Related guides
GUIDEWhat Are Screenings? A Guide to Crushed Stone FinesScreenings are fine crushed stone used for paver bases, joint fill and walkways. See what screenings are, common types, and mistakes to avoid.Read guide →
GUIDEWhat to Put Under River Rock for Landscaping BedsHere is what to put under river rock landscaping: a compacted base where needed, then landscape fabric, then rock, to stop weeds and settling.Read guide →GUIDEHow to Clean River Rock and Restore Its ColorLearn how to clean river rock landscaping with rinsing, soap and vinegar methods, plus common mistakes to avoid for a brighter, longer lasting rock bed.Read guide →
GUIDEHow to Lay a Gravel Driveway: Step-by-Step GuidePractical, field-tested guide: how to lay gravel driveway. Pulled from real US installer notes and 2026 supplier price data.Read guide →Frequently Asked Questions
How is fill dirt different from clay?
Clay is a fine soil that holds water and turns sticky when wet. Fill dirt is a bulk mix that can contain clay alongside sand and small stone, and it is chosen for volume rather than for its clay content. If your site is already mostly clay, the new fill still needs to be spread and worked in layers.
Will fill dirt bring weeds into my yard?
Bulk soil can carry weed seeds from wherever it was dug, so a few weeds may appear on a freshly graded area. Pull them early, before they set seed, and keep the surface covered with the finish layer once grading is done. Regular checks over the first few weeks catch most of them.
Can I use fill dirt under a shed?
A shed pad is one of the common uses, provided the base is firm and level before the shed sits on it. Check the level across the full footprint, not just the middle, because a shed on an uneven pad can rack or sag. Confirm the pad size against the shed kit before you order.
Is fill dirt a good base for a patio or play area?
Fill dirt is not the finish for a patio or play area. Those surfaces sit on a base material designed to carry load and shed water, such as crushed stone or a sand layer. Use fill dirt to bring the level up beneath that base, then add the layers the surface specifies.
Should I test fill dirt before using it?
Ordinary grading does not require a test, but a soil test helps if the site will grow food or sits near a well. Ask your local extension office or a testing lab what they recommend for your situation. Keep a small sample from the delivery if you want a record of what arrived.
What should I do with leftover fill?
Spread it in a low spot on the same site rather than leaving it in a pile, since piles tend to spread out on their own. If you must store it briefly, cover it with a tarp to keep it from washing into the lawn. Leftover fill is often useful for a small repair later.
Should I spread it by hand or hire a crew with equipment?
Match the method to the volume. A single low corner or a small pad is manageable with a rake and wheelbarrow over a weekend, while a large grade change or several loads calls for a loader or skid steer and an operator. Whichever you choose, keep machines on the area being filled so the rest of the lawn is not torn up.
How do I measure a sloped yard for fill?
On a slope the depth changes across the area, so take readings at the high end, the middle and the low end, then average them before using the volume formula. For a steep or irregular lot, split it into sections and measure each one separately. That gives a closer total than a single average across the whole yard.