Pea Gravel Delivery in Parker, CO for Bulk Orders
Pea Gravel · Parker, CO

Pea Gravel Delivery in Parker, CO for Bulk Orders

Bulk pea gravel delivered in Parker, CO. Stone size 1/4 - 3/8. Tan / mixed color.

Starting from $640.21 delivered to Parker for 2 tons, our minimum order

Weight per yard 2800 lb Density 103.7 lb/cu ft Size 1/4 - 3/8

A pea gravel delivery in Parker, CO, suits homeowners who want a clean, rounded surface without the labor of carrying bagged stone. Parker sits in Douglas County, southeast of Denver, and the town has about 65,000 residents. Pea gravel is a decorative material rather than a structural one, so the best projects are places where the stone is seen and walked past instead of driven over. You can compare the full statewide range on our Pea Gravel in Colorado page.

Where Pea Gravel Works Well in Parker

Parker yards mix lawns, patios and planting beds, and pea gravel tends to earn its place in a few predictable spots.

Each use sits on a different part of the yard, so think about the route people take before you mark the edge. Driveways and any spot where a vehicle turns are the wrong fit, because the stones shift under tires. If the surface has to carry traffic, a compacted material is the better choice. When you compare options, Mulch is sold by the cubic yard and works in planting beds that need organic cover, while Premium Screened Topsoil is sold by the ton and serves as a base for lawns and new beds.

Pea Gravel Delivery for Parker Yards

Parker lots vary, from flat yards in recent neighborhoods to older properties with uneven grades and mature trees. Walk the site before you decide, and note how water and foot traffic already move across it. Those details show whether a loose surface suits the spot or whether a different material would serve better. Pick a staging spot before the load arrives too. A level area near the work, clear of the lawn and out of the way of the gate swing, lets you move stone by wheelbarrow in short trips.

Pea gravel shows its best results where the layout is simple. A straight path, a clean border or a single bed is easier to fill evenly than a yard broken into many small pockets.

How Much Pea Gravel to Order in Parker

Work out the area in feet by multiplying length by width, then choose a depth in inches. Multiply the area by the depth and divide by 324 to get cubic yards. For instance, a 12 by 16 foot area at 2 inches deep comes to about 1.2 cubic yards. The stone runs 2,800 pounds per cubic yard, or about 1.4 tons, so that area needs roughly 1.7 tons once converted. A planting bed tends to need a little more depth than a flat walkway, since the surface has to cover the soil fully. Plan a small surplus so the finished surface does not look sparse after the stones bed in. For a faster estimate, the calculator handles the arithmetic and the unit conversion from your dimensions.

Pricing Notes for Parker Pea Gravel

This material is sold by the ton. Once you enter your ZIP, the delivered price for that address appears on the page, and the figure already includes delivery. Larger orders carry a lower rate per ton, so one bigger order usually beats several small ones for a yard with multiple areas. Compared with buying bags at a store, the bulk route removes many trips and most of the lifting. The smallest order is two tons, so a narrow strip of path may still come with more stone than the math alone calls for.

Delivery Options Around Parker

The delivery in Parker page explains the city service in more detail. Parker is close to several larger cities, with Centennial about 7 miles away, Castle Rock about 10, Aurora about 16, Denver about 20 and Lakewood about 21. Treat those figures as orientation only, since they describe the distance between towns and say nothing about how far a load can travel.

Ordering Pea Gravel in Parker

Select pea gravel, enter the tonnage starting at 2, and continue to the checkout step. Before you place the order, confirm the tonnage against the area and depth you worked out above, so the load matches the project.

About Pea Gravel

This decorative pea gravel has pieces around 1/4 to 3/8 inch across and a tan, mixed-tone color. It reads as a soft, natural material, which makes it a practical match for garden paths, patio edges and planting areas that need a finished look.

What sets it apart from crushed stone is the round, smooth shape. Angular crushed rock interlocks when compacted, while these pieces roll and move. The result is a surface that feels easy underfoot but does not hold up to vehicle loads, so it belongs in walkways and decorative zones rather than on a drive.

We sell pea gravel by the ton. Bulk ordering removes the need to haul bags, and a well-planned order can supply several areas of a single property in one delivery.

What Pea Gravel costs in Parker

Around Parker, pea gravel is quoted by the ton with delivery layered in based on distance from the closest yard. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. Plan on roughly 77 sq ft of coverage per ton at 3 inches deep, which puts a single-car driveway in the 4 to 8 ton bracket.

How crews use Pea Gravel in Parker

Parker contractors keep pea gravel on the order sheet for a short list of standard installs. Top of the list is patio gravel, where the material is rolled out in tight urban lots and infill builds and screeded to grade. Right behind that is walkway gravel, common in dense neighborhoods where curb access is short and often paired with edging or fabric below the lift. Parker sits at about 65,473 residents, which means we see steady weekday traffic from landscape crews and weekend pickups from owner-builders.

Delivery day in Parker

Delivery in Parker runs out of the nearest pit; you get a two hour arrival window the evening prior and a call when the driver leaves the scale. Plan for 12 ft of clear path for a tandem and 14 ft for a tri-axle, plus a level area at the dump point so the bed lifts straight. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

SAME CATEGORY

Related materials we deliver in Parker

Estimate how much you need

Work out your material

Cubic yards0 cu yds
Approximate weight0 tons

A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.

PRODUCT & CITY HUBS

Browse more

NEARBY

Available in nearby cities

TOOLS

Plan your project

KEEP READING

Related guides

Frequently Asked Questions

How is pea gravel different from decomposed granite in a Parker yard?

Decomposed granite suits a trail or a patio that needs to feel solid. Pea gravel suits a look where the stones are visible and the surface stays soft. Pick by how much firmness you want under foot.

Can pea gravel go over an existing lawn?

It is better to remove the grass first. Grass left under the stone keeps growing up through the layer, and it can rot and push stones out of place. Cut or strip the sod, level the area, and then spread the gravel. Leaving a lawn in place only makes sense for a very thin, temporary covering.

Can pea gravel be used in a shady north-facing side yard?

Yes, but shade can allow moss and algae to form on the stone and on any soil showing between pieces. Rake the surface regularly and keep leaves from building up. If moss keeps returning, thin out nearby plants to let more sun reach the area.

Can pea gravel fill the joints between pavers?

It can fill joints in a paver patio, but it is not a base material. The base under the pavers should be compacted crushed aggregate. Pea gravel works in the joints because the small, rounded pieces slip between the pavers, but it can wash out if the joints are wide or the area gets heavy foot traffic.

Will bikes, wagons or wheelbarrows roll easily over pea gravel?

Not easily. Loose rounded stones let wheels sink and push sideways, which makes pushing a wheelbarrow tiring on a long run. A wheelbarrow with a wide tire handles it better than a narrow one. For a route that gets regular wheeled traffic, a firmer surface is a better choice.

How do I level pea gravel after it is spread?

Rake the surface with a steel rake in short, overlapping strokes until the depth looks even. Work from one end to the other and pull stones from high spots into low ones. Walk the area afterward and fill any dips with a few extra stones. A level finish keeps water from pooling in low pockets and keeps the look uniform.

How do I protect pea gravel from leaf blowers and mowers?

Blowers push stones onto the lawn and across patios, so aim the nozzle away from the bed and keep it low. Set mower heights so the blade clears the edge of the layer. A short run of landscape edging along the lawn side keeps stones from spreading and reduces the number of times you need to rake them back.

Can pea gravel work for a rock garden with succulents?

It works well as a top layer for drought-tolerant plants such as succulents, because the stone keeps the crowns dry and the surface looks clean. Plant into a well-drained mix, set the plants in soil pockets, and keep the stone clear of stems. Avoid planting in dense, clay-heavy ground under the stone, since moisture will linger around the roots.

Order Pea Gravel →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop