Pea Gravel Delivery in Port Arthur, TX for Drainage
Bulk pea gravel delivered in Port Arthur, TX. Stone size 1/4 - 3/8. Tan / mixed color.
Starting from $590.76 delivered to Port Arthur for 2 tons, our minimum order
Port Arthur, TX sits on the Texas Gulf Coast near the Louisiana line, and yards there deal with heavy rain, humid summers and low spots that hold water. Pea gravel delivery in Port Arthur, TX gives that water a path through the ground. This page explains where the stone works, how to estimate a load and how ordering and the delivered price fit together.
Ordering pea gravel for Port Arthur
Order by the ton. The delivered price for your ZIP appears on the page, and larger orders step down to a lower rate per ton. The smallest order is 2 tons, which is a sensible starting point for a small patio or a walkway.
Where the stone works in Port Arthur
- Walkways and garden paths: a stone surface that stays open to rain is easier to keep clear through a wet season.
- Fence lines: a strip of stone along a fence gives mowers and foot traffic a clean line to follow.
- Shaded patios: loose stone under a deck or carport keeps the ground beneath it from turning to mud.
- Drainage swales: a shallow channel filled with the stone moves runoff from a low corner of the lot.
The wet season shapes the schedule. Summer afternoons often bring storms, so spreading goes better in the morning, and raking after a storm is easier once the top layer dries. On a lot that tilts toward a neighbor, run the stone along the low side so runoff does not carry it across the property line.
Pea gravel delivery in Port Arthur, TX and drop spots
Local ordering details sit on delivery in Port Arthur, and the truck brings the load to your address. Pick a drop spot with firm ground, since soft or saturated soil can rut under a heavy load. Keep the path from the street clear, check that gates and carports have room for the truck, and mark where the pile should sit so the driver can place it with the least handling.
Beaumont is the nearest town on this list, about 18 miles away, and orders there use the same ZIP-based pricing. For Port Arthur neighbors across Texas, see Pea Gravel in Texas.
Estimating tonnage for a Port Arthur project
Take the length and width in feet, the depth in inches, multiply the three, and divide by 324 to get cubic yards. Multiply the yards by 1.4 to get the tons to order for a Port Arthur walkway or swale. A margin of about a tenth more covers stone that packs down and edges that take more than the plan shows. The calculator runs this math for you if you would rather not do it by hand.
Who orders pea gravel in Port Arthur
Homeowners across Port Arthur and small landscape crews both buy pea gravel for paths, patios and drainage work. Port Arthur orders tend to come from homeowners fixing a wet corner and from small crews doing paths and drainage, and the length, width and depth are all that is needed to size them.
Edging a Gulf Coast pea gravel layer
Edges keep the stone in place when rain and foot traffic push it outward. A row of pavers set flush with the grade is the simplest option beside a lawn, because a mower can run over the top. Landscape timbers suit a garden path with a rustic look, though humid weather can rot them and they need replacing sooner. A concrete curb is the most durable choice for a patio or a path that sees steady foot traffic, and it is worth setting before any stone arrives.
Topsoil and mulch in Port Arthur
Where a bed needs fill soil, Premium Screened Topsoil is ordered by the ton as well. Ground cover goes by volume: Mulch comes in cubic yards, a separate entry from the stone.
About Pea Gravel
Washed and rounded, this stone runs mostly 1/4 to 3/8 inch across in a tan and mixed color. The stones are smooth, spread with a rake and let water move through the layer instead of pooling on top, which is why the material shows up so often in drainage work.
Rounded pieces do not interlock, so the surface shifts a little under foot traffic and looks best on flat ground. Pea gravel is quoted by the ton on this page. Its tan tone sits well against brick, painted siding and dark mulch, and it looks neat beside a sidewalk or a bed of low shrubs. It is a good match for areas that need stone rather than soil, but it is not a base for a driveway.
What Pea Gravel costs in Port Arthur
Around Port Arthur, pea gravel is quoted by the ton with delivery layered in based on distance from the closest yard. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. Plan on roughly 77 sq ft of coverage per ton at 3 inches deep, which puts a single-car driveway in the 4 to 8 ton bracket.
How crews use Pea Gravel in Port Arthur
Port Arthur contractors keep pea gravel on the order sheet for a short list of standard installs. Top of the list is patio gravel, where the material is rolled out in tight urban lots and infill builds and screeded to grade. Right behind that is walkway gravel, common in dense neighborhoods where curb access is short and often paired with edging or fabric below the lift. Port Arthur sits at about 55,799 residents, which means we see steady weekday traffic from landscape crews and weekend pickups from owner-builders.
Delivery day in Port Arthur
Delivery in Port Arthur runs out of the nearest pit; you get a two hour arrival window the evening prior and a call when the driver leaves the scale. Plan for 12 ft of clear path for a tandem and 14 ft for a tri-axle, plus a level area at the dump point so the bed lifts straight. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in Port Arthur
Price by ZIP- Size3/8″
- Density2800 lb/yd³
- ColorMixed earth
Price by ZIP- Size1 - 3″
- Density2700 lb/yd³
- ColorMixed natural
Price by ZIP- Size0 - 1/4″
- Density3000 lb/yd³
- ColorTan, gold
Estimate how much you need
Work out your material
A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.
Browse more
Available in nearby cities
Plan your project
Related guides
GUIDEGravel Size Chart: Pea Gravel to Crushed StoneA gravel size chart showing pea gravel, crushed stone and river rock diameters side by side, so you can match the right size to your project.Read guide →GUIDEThe Different Types of Gravel and How to ChooseA plain-language guide to the main types of gravel, covering pea gravel, crushed stone, river rock and decomposed granite.Read guide →GUIDEHow Much Does Gravel Cost? A Practical Pricing GuideHow much does gravel cost and why does it vary? See the real factors behind ton pricing, delivery, and order size before you buy.Read guide →GUIDEWhat to Put Under River Rock for Landscaping BedsHere is what to put under river rock landscaping: a compacted base where needed, then landscape fabric, then rock, to stop weeds and settling.Read guide →Frequently Asked Questions
How does pea gravel compare with crushed shell?
Crushed shell packs firmer than pea gravel and gives a lighter, brighter look. Pea gravel stays loose and rounded, which makes it more comfortable for a walkway or a patio and less suited to a load that needs to stay put. If the area carries a lot of traffic or a vehicle, a firmer material is the better pick, and pea gravel is best kept to paths and open beds.
Does pea gravel need a base layer first?
On soft or heavily used ground, a base of compacted material under the stone keeps the layer from sinking. Lighter uses can go straight onto firm, cleared soil once weeds are removed and the grade is even. A local landscaper can tell you which applies to a given site, and the depth you choose usually matters more than the base.
How do I clean a green film off pea gravel?
Humid months can leave a green film on loose stone. Rake the surface to break up the film, then rinse with a hose. Stones that stay dirty after rinsing can be lifted out and replaced with clean ones. Keeping debris such as leaves and fallen blossoms off the layer slows the film from coming back.
Can pea gravel go under a patio umbrella or clothesline?
A small pad of pea gravel under an umbrella base or a clothesline post keeps the ground from turning to mud and gives the post a firm, tidy footing. Set a paver or a shallow concrete pad under the post so the stone does not shift under the weight. Rake the surrounding stone back after each strong wind.
Can I spread pea gravel over an old gravel bed?
Yes, but rake and loosen the old layer first, pull any weeds, and check that the bed is still level. Add the new stone in thin passes so it blends with the old, and mix the two as you go to avoid a stripe of color. Where the old bed has packed into a hard crust, break it up before you add anything.
What should I do if pea gravel spills onto the lawn?
Rake the stone back by hand before the grass is cut, since a mower can throw stones across the yard. Use a flat edge or a spade to re-form the border line. Where grass has been covered for a while, reseed the bare patch once the stone is cleared, and water it until the new grass fills in.
Is pea gravel a good choice for a shrub-lined garden path?
It works well when the path has a clear edge and the shrub roots are not crowded under the stone. Keep the layer a short distance from the trunk of each shrub, so the roots have room to spread and the stone does not bury the crown. A rounded stone looks natural beside shrubs, and it is easy to rake back into a clean line each season.
How long does a pea gravel layer last?
Pea gravel does not wear out so much as move. A well-built layer can stay useful for many years, but foot traffic and rain shift stone outward over time, so the bed needs raking and some topping up when the surface thins. Keep track of worn spots near steps and gates, since they show the first signs of thinning.