
Fill Dirt Delivery in Alexandria, VA
Bulk fill dirt delivered in Alexandria, VA. Brown color.
Starting from $504.33 delivered to Alexandria for 2 tons, our minimum order
Fill dirt delivery in Alexandria, VA: what to expect
Most fill dirt deliveries to Alexandria, VA go to small, tight jobs: a backyard that needs raising, a utility trench to close, a low corner beside a rowhouse patio. Alexandria is a dense city of about 159,000 people, and lots here are rarely wide open, so a truck-sized pile has to land where it can actually be reached. MyGravelBuddy sells it by the ton, and your ZIP gets a delivered price calculated live. Alexandria fill dirt orders start at 2 tons.
Washington is about 7 miles away and Baltimore about 41 miles. Our delivery in Alexandria page covers how orders reach the city in general. This page is about the dirt itself.
Where fill dirt earns its place in Alexandria
Fill is the bulk, unglamorous layer under almost everything. In an older neighborhood that usually means one of four jobs.
- Regrading a yard so water runs toward a drain or the street instead of toward a foundation wall.
- Backfilling around a new footing, a retaining wall, or a repaired water line.
- Raising a low patch before a patio, shed pad, or walkway goes in.
- Bulking up a bed that will later get a finish layer on top.
In Alexandria, fill dirt does its work as the base layer under a project. It is not meant to grow a lawn directly. For the final few inches, order Premium Screened Topsoil and spread it over the compacted fill. If the project is a drainage trench or a path rather than a raised area, Pea Gravel is the usual partner material, since it drains where dirt holds water.
Planning where the load goes
Tight Alexandria streets and alleys shape this more than anything else. Before you order, walk the route from the curb to the work area. Parked cars, low branches, overhead wires and narrow gates all decide whether the load can go where you want it. If the work area is in a rear yard with no truck access, plan to have the pile dropped at the curb or driveway and move it with wheelbarrows or a small loader. Put a tarp or plywood sheet under the drop spot so the pile does not stain a driveway or smother a lawn you want to keep.
Dirt left in a heap turns to mud in a heavy rain, and it will wash into the street and storm drains. Cover the pile if you will not spread it the same day, and keep it away from a downhill neighbor's property line.
How much fill dirt you need
Measure the area in feet, multiply length by width, then by the depth you want in feet, and divide by 27 to get cubic yards. Fill dirt is weighed in tons, and a cubic yard of it runs about 2,200 pounds, so even the smallest order of 2 tons covers about 1.8 cubic yards. For a rectangular bed that is easy to do by hand. For an odd shape, split the area into rectangles and add them up. The calculator will do the arithmetic if you enter the length, width and depth.
Fill compacts after it is spread and rained on, so a thick lift will end up lower than you left it. Add a modest cushion over your measured number rather than ordering to the exact inch, since topping up later means a small separate order without the lower rate a larger one earns. Alexandria projects that look small, like a single fence line or a narrow side yard, often still reach the 2 ton minimum once you do the math.
How pricing works
You will not find a price list here, because the price depends on where the material is going. Enter your ZIP in the order panel and the delivered price for that address appears, calculated live. Larger orders get a lower rate per ton, so one big drop is cheaper than several small ones. The figure shown is the delivered price for the load, which is the number to compare against anything else you are quoting.
Ordering fill dirt for your Alexandria project
Once the tonnage is settled, the order panel handles the rest. If you are working across the state, our Fill Dirt in Virginia page shows where else we deliver it. A few things are worth having ready before you check out: the exact spot for the pile, a clear path for the truck.
About Fill Dirt
Fill dirt is general-purpose subsoil, brown in color, used to build up and level ground before a finish surface goes on. It is not screened or enriched, so it is not meant for planting lawn or gardens directly. Its job is volume: it raises a low spot, backfills around structures, and fills trenches and holes. A cubic yard weighs roughly 2,200 pounds, which is why it is sold by the ton rather than by volume.
Because it is a base material, the texture can vary from load to load, with some clay, sand and small stones mixed in. That is normal. Spread it in layers rather than one thick pour, and compact each layer with a plate compactor or by running over it with equipment. Slope the finished grade away from buildings so water does not collect against a wall. Once the fill is settled, add topsoil or another surface material on top.
Orders start at 2 tons, and a bigger load brings a lower rate per ton.
What Fill Dirt costs in Alexandria
In the Alexandria market, fill dirt is sold by the ton and priced at the gate before delivery is added on. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. One ton covers about 98 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons.
How crews use Fill Dirt in Alexandria
Crews working out of Alexandria tend to call for fill dirt on a few repeat jobs each week. The first is erosion control, typically laid in tight urban lots and infill builds with a base lift compacted before the finish course goes on. The second is driveway gravel, which lands here in dense neighborhoods where curb access is short and usually ships as a 4 to 8 ton order. With a population around 159,200, Alexandria pulls a mix of single-truck homeowner orders and contractor full-loads through the season.
Delivery day in Alexandria
On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other Alexandria stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in Alexandria
Price by ZIP- SizeScreened, no size grade
- Density2200 lb/yd³
- ColorDark brown
Price by ZIP- Density2000 lb/yd³
- ColorDark brown
Price by ZIP- Density1000 lb/yd³
- ColorDark brown
Estimate how much you need
Work out your material
A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.
Browse more
Common uses for Fill Dirt in Alexandria
Available in nearby cities
Plan your project
Related guides
GUIDEHow to Lay a Gravel Driveway: Step-by-Step GuidePractical, field-tested guide: how to lay gravel driveway. Pulled from real US installer notes and 2026 supplier price data.Read guide →
GUIDEDoes Gravel Stop Weeds? Honest Answer + What WorksPractical, field-tested guide: does gravel stop weeds. Pulled from real US installer notes and 2026 supplier price data.Read guide →
GUIDEHow Much Gravel Do I Need? Quick Sizing GuidePractical, field-tested guide: how much gravel do i need. Pulled from real US installer notes and 2026 supplier price data.Read guide →
GUIDEWhat Is #57 Stone? Uses, Size, and Cost ExplainedPractical, field-tested guide: what is 57 stone. Pulled from real US installer notes and 2026 supplier price data.Read guide →Frequently Asked Questions
Can I grow grass straight on fill dirt?
It is better not to. Fill dirt is a bulk subsoil without the organic content that grass roots want, so seed often struggles and washes out. Use it for the lower layers, compact it, then spread a few inches of topsoil over the top before seeding or laying sod. For Alexandria lots, that gives roots something to grip while the fill does its structural work underneath.
Do I need to clear the lawn before spreading fill?
For a raise of more than a couple of inches, yes. Cut or scrape off the sod so the new dirt sits on firm ground rather than a mat of roots that rots and sinks. Pull out any stumps, rubble or loose debris at the same time. A thin lift over healthy grass is the exception, and the grass will usually grow back through it.
How do I compact fill dirt properly?
Spread it in lifts of about 6 inches, then compact each lift before adding the next. A rented plate compactor works for most yards. Lightly moist soil packs better than dry or soaked soil. Skipping the layering is the usual cause of sinking later, especially under patios, slabs and walkways where uneven settling shows.
Will the dirt be the same in every load?
Not exactly. Fill dirt is general subsoil, so color and texture can shift a little, with some clay, sand or small stones. It is chosen for volume and compaction, not for a uniform look. If appearance matters on the surface, cover the fill with topsoil or a decorative material instead of leaving it exposed.
Is fill dirt safe to use near a foundation?
Yes, for backfilling, as long as you slope the final surface away from the wall and keep it a few inches below siding or sill plates. Fill that is packed tight against wood or sits above the foundation line invites moisture and pests. Direct downspouts away from the filled area as well.
Can I order less than a full truckload?
Two tons is the least Alexandria fill dirt you can book. Above that you choose the number of tons through the order panel, and the delivered price updates for your ZIP. If your estimate comes in under 2 tons, round up to the minimum and use the extra to top up low spots elsewhere on the property.
How can I check that the fill is level once it is spread?
Stretch a string line between two stakes and measure down from it at several points, or lay a long straightedge across the surface with a level on top. Low spots show up as gaps under the board. Rake the high areas into the low ones, and check again after the first rain, since fill often shifts slightly.
Should I mix fill dirt with other materials?
Usually no. Keep fill as a clean, separate layer. Mixing in gravel or topsoil for planting or stone for a path.