Fill Dirt Delivery in San Mateo, CA, Sold by the Ton
Fill Dirt · San Mateo, CA

Fill Dirt Delivery in San Mateo, CA, Sold by the Ton

Bulk fill dirt delivered in San Mateo, CA. Brown color.

Starting from $453.17 delivered to San Mateo for 2 tons, our minimum order

Weight per yard 2200 lb Density 81.5 lb/cu ft

Fill dirt delivery in San Mateo, CA suits projects where the ground has to come up to grade: a low corner of the backyard, a sunken walkway, or a trench that dropped after the work was finished. The material arrives in bulk, so you spread it once instead of hauling bags from a store.

San Mateo lots, from hillside to bayside

San Mateo has about 100,000 residents and sits on the Peninsula between San Francisco and San Jose. Lots on the hillside and flat lots closer to the bay can need very different amounts of fill, so measure the site instead of guessing from the street.

For orientation, Daly City is about 12 miles from San Mateo, Hayward about 15 miles, and Fremont and Oakland about 18 miles each. San Francisco is about 17 miles away.

Best uses for fill dirt in San Mateo

Most jobs fall into a few groups. Each one needs the finished surface at a slightly different height, so settle on the final grade before you place the order.

Whatever the job, slope the finished surface away from the house. Water sitting against a foundation causes far more trouble than a slightly uneven lawn ever will, and a good fall costs nothing beyond the time it takes to shape the grade.

Fill is also a fit for grade work that does not show. A corner that stays soggy after every storm usually needs its height raised and reshaped, and bulk fill is the simplest way to change the height of the ground under the sod without tearing it up.

How much fill dirt you need in San Mateo

Measure the length and width of the area in feet, and the depth in inches. For San Mateo fill dirt jobs, multiply length by width by depth, then divide by 324 to get cubic yards. At about 2,200 pounds a cubic yard, multiply the yards by 1.1 to get tons.

Add a little extra, because loose fill packs down and sinks as it settles under its own weight and rain. Our calculator does the arithmetic once you enter the dimensions, so you can check your own figure against it.

Fill dirt delivery and drop spot in San Mateo

Start with delivery in San Mateo for the details that apply to your street. Ask the driver to tip the load near the work, on ground the truck can reach and leave without backing across the lawn. A pile left at the far end of a yard means a lot of wheelbarrow runs later.

Schedule the drop for a stretch without rain. Soaked fill spreads poorly and will not pack evenly.

Pricing fill dirt by the ton in San Mateo

Fill dirt is priced per ton. The engine works out a delivered figure for the ZIP you enter, and that figure is shown on the page before you commit. Bigger loads bring the rate per ton down, so a larger project usually costs less per ton than a small top-up. In San Mateo, fill dirt orders start at 2 tons.

If the project needs a firmer base under a patio or shed, #57 Crushed Stone is a common choice, and it is also sold by the ton. For a driveway or path base, Asphalt Millings is another option that many homeowners compare against fill.

How to order fill dirt in San Mateo

Enter your ZIP, set the quantity in tons, and check the delivered total on the order page before you confirm. If your San Mateo lot has more than one low area, jot down each measurement first so the quantity you enter matches the whole job and not just the biggest spot. For more on the material itself, see Fill Dirt in California.

About Fill Dirt

Fill dirt is the subsoil that sits under the topsoil layer. It is brown, mostly mineral, and low in the organic matter that feeds lawns and garden plants. That makes it a practical material for raising grade and filling voids, and a poor choice for a planting surface on its own.

Crews and homeowners reach for it when the job is about volume rather than finish. A yard that has settled, a utility cut that left a dip, or a low corner that holds water can all be brought up with bulk fill instead of many small bags. Because it is sold by the ton, you order by weight, and the quantity follows from the tonnage your project needs.

Fill dirt is also the lower layer under other finishes. Topsoil, sod, mulch or a stone base can go on top once the fill is in place, depending on what the area is for.

What Fill Dirt costs in San Mateo

Around San Mateo, fill dirt is quoted by the ton with delivery layered in based on distance from the closest yard. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. Plan on roughly 98 sq ft of coverage per ton at 3 inches deep, which puts a single-car driveway in the 4 to 7 ton bracket.

How crews use Fill Dirt in San Mateo

San Mateo contractors keep fill dirt on the order sheet for a short list of standard installs. Top of the list is erosion control, where the material is rolled out in tight urban lots and infill builds and screeded to grade. Right behind that is driveway gravel, common in dense neighborhoods where curb access is short and often paired with edging or fabric below the lift. San Mateo sits at about 103,006 residents, which means we see steady weekday traffic from landscape crews and weekend pickups from owner-builders.

Delivery day in San Mateo

Delivery in San Mateo runs out of the nearest pit; you get a two hour arrival window the evening prior and a call when the driver leaves the scale. Plan for 12 ft of clear path for a tandem and 14 ft for a tri-axle, plus a level area at the dump point so the bed lifts straight. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

SAME CATEGORY

Related materials we deliver in San Mateo

Estimate how much you need

Work out your material

Cubic yards0 cu yds
Approximate weight0 tons

A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.

PRODUCT & CITY HUBS

Browse more

PROJECTS

Common uses for Fill Dirt in San Mateo

NEARBY

Available in nearby cities

TOOLS

Plan your project

KEEP READING

Related guides

Frequently Asked Questions

How many tons do I need for a 20 by 30 foot area that is 6 inches deep?

That works out to 3,600 before dividing by 324, which gives about 11.1 cubic yards, or around 12 tons. Count the 6 inches as the height you want to add above today's grade, not the depth of a hole that already exists. Round up slightly if the ground is uneven.

What is the difference between fill dirt and topsoil?

Fill dirt is mostly subsoil. It builds up the ground and fills low areas, but it has little organic matter, so it does not support lawns or flowers well on its own. Topsoil on the surface, with each one sized to the job.

How do I size fill for a bayside San Mateo lot that stays wet?

Go out a day after a hard rain and push stakes in at the edge of the wet patch. Measure that outline as your length and width, then take the depth from the stake height needed to lift the lowest point above the water mark. Measuring the real wet footprint beats estimating from the dry yard, and it shows if the area is larger than it looks.

Can fill dirt go against a retaining wall or a foundation?

Be careful. Soil placed against a wall pushes on it, and a wall that was not designed to hold extra soil can move or crack. Ask the wall's builder or a structural engineer how much load it can take before adding fill against it. Foundations need the same care, so confirm the plan before the first load is placed.

How should I fill a deep low spot so it does not sink later?

Place the fill in layers of roughly 4 to 6 inches. Dampen each layer lightly, pack it down, and only then add the next one. A single thick dump tends to settle unevenly and leaves a dip that shows up after the first season. Layers take more time, but the surface stays level.

How long does new fill take to settle?

Expect some dip during the first season. How much depends on the depth, the moisture and how the fill was packed, so there is no single number to plan around. Wait until the surface has stopped moving, then add topsoil at that point is usually all the area needs.

Can I pile fill dirt against a tree trunk?

No. Raising the soil around a trunk buries the roots that the tree needs for air and water, and the stress can show up years later. If a tree sits in a low spot, ask a certified arborist about the options before you place any material over its root zone.

Can I stockpile fill on the site for a few weeks?

A stockpile works if it sits on level ground away from the house, walks and the street. Rain soaks the pile, so a tarp helps if the wait runs long. Keep a clear path around the pile, and start spreading it soon after it arrives so the material does not sit in one spot for weeks.

Order Fill Dirt →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop