Fill Dirt Delivery in Chandler, AZ by the Ton
Fill Dirt · Chandler, AZ

Fill Dirt Delivery in Chandler, AZ by the Ton

Bulk fill dirt delivered in Chandler, AZ. Brown color.

Starting from $466.30 delivered to Chandler for 2 tons, our minimum order

Weight per yard 2200 lb Density 81.5 lb/cu ft

A load of fill dirt is usually the first thing a grading project needs. We offer fill dirt delivery in Chandler, AZ by the ton, with the delivered price worked out for your ZIP on the page. It is a brown, compactable base material meant for building up ground, not for planting.

Fill dirt delivery in Chandler, AZ, and what it does well

Fill dirt is the economical way to raise grade. In a city of roughly 276,000 people, common jobs include leveling a back lot before a block wall goes up, bringing a patio slab up to the door threshold, filling a trench after a utility repair, or backfilling around a new pool shell. Because it packs down firmly, it also works under pavers, sheds and concrete pads.

If the area will grow grass or beds, use fill for the bottom and finish with a layer of Premium Screened Topsoil on top. For a clean decorative or drainage layer above the fill, Pea Gravel is the usual partner.

About this material

Fill dirt here is brown, mixed native-type soil sold by the ton. It is not screened to a fine texture, so expect some small stones and a few clods. That is normal and helps it lock together when compacted. A cubic yard of loose fill weighs about 2,200 pounds, a little over a ton.

Where the truck can drop

Pick the drop spot before the truck shows up. Dump trucks need a firm, level approach and clear overhead space, so trim low branches and check for power lines over the driveway. If a side gate is too narrow for a skid steer, choose a spot at the front of the driveway and move the dirt from there with wheelbarrows. A tarp under the pile keeps the concrete clean. You can read how drop-offs work on the page for delivery in Chandler.

How much fill dirt to order

Start with the area you want to raise. Multiply length by width in feet, then by the depth of fill in inches, and divide by 324 to get cubic yards. Multiply by about 1.1 to turn yards into tons. A 20 by 30 foot back lot raised 6 inches comes to roughly 11 cubic yards, or about 12 tons. Add extra for compaction, since fill drops noticeably after it is tamped or rained on.

If you would rather not do the math by hand, the calculator will give you a tonnage from your measurements. In Chandler the smallest order is 2 tons.

Pricing, in plain terms

We do not post a flat per-ton price here, because the real cost depends on where the load is going. Enter your ZIP and the page calculates the delivered price for your address, with delivery included in the figure you see. Ordering more tons lowers the rate per ton, so combining a fill job with a second project can pay off, and the quote updates as you change the quantity.

Working with fill once it lands

Spread the dirt in layers of about 4 to 6 inches and tamp each one before adding the next. Fill placed in one tall lift stays soft underneath and settles unevenly later. Slope the finished surface away from the house, and keep it clear of the stucco line. When fill sits near Chandler's neighbors, a quick check with them about where water will run saves arguments later.

Gilbert is 6 miles away, Mesa 8 miles and Tempe 10 miles. For wider coverage, see Fill Dirt in Arizona.

Ready to order

A typical Chandler job is small enough to finish in a weekend: a few loads of fill, a rented plate compactor and a rake. Plan the work around the heat, and keep a hose nearby, since slightly damp dirt compacts better than bone-dry dirt in an Arizona summer.

Put in your ZIP, pick your tons, and check out.

About Fill Dirt

Fill dirt is a brown, general-purpose soil used to raise and level ground. It is sold by the ton and delivered loose by dump truck. Unlike topsoil, it is not screened or enriched, so it contains small stones and some clay. That is what lets it compact into a firm base under slabs, pavers and walls.

Use it to backfill trenches, fill low spots, build up a pad, or bring a yard up to a new grade. Do not use it as a final growing layer, since it holds few nutrients and can crust over. Plan on about 1.1 tons per cubic yard when you convert a volume to a weight, and tamp it in lifts for the best result.

What Fill Dirt costs in Chandler

Around Chandler, fill dirt is quoted by the ton with delivery layered in based on distance from the closest yard. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. Plan on roughly 98 sq ft of coverage per ton at 3 inches deep, which puts a single-car driveway in the 4 to 7 ton bracket.

How crews use Fill Dirt in Chandler

Chandler contractors keep fill dirt on the order sheet for a short list of standard installs. Top of the list is erosion control, where the material is rolled out in tight urban lots and infill builds and screeded to grade. Right behind that is driveway gravel, common in dense neighborhoods where curb access is short and often paired with edging or fabric below the lift. Chandler sits at about 275,987 residents, which means we see steady weekday traffic from landscape crews and weekend pickups from owner-builders.

Delivery day in Chandler

Delivery in Chandler runs out of the nearest pit; you get a two hour arrival window the evening prior and a call when the driver leaves the scale. Plan for 12 ft of clear path for a tandem and 14 ft for a tri-axle, plus a level area at the dump point so the bed lifts straight. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

SAME CATEGORY

Related materials we deliver in Chandler

Estimate how much you need

Work out your material

Cubic yards0 cu yds
Approximate weight0 tons

A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.

PRODUCT & CITY HUBS

Browse more

PROJECTS

Common uses for Fill Dirt in Chandler

NEARBY

Available in nearby cities

TOOLS

Plan your project

KEEP READING

Related guides

Frequently Asked Questions

Can I use fill dirt to grow grass?

Not by itself. Fill dirt has little organic matter, so grass struggles in it. Use it to build up the grade, then cover it with a few inches of screened topsoil before seeding or laying sod. That gives roots something to grow in and still keeps a firm base underneath.

How do I keep dust down while spreading fill?

Dry fill raises dust as soon as you rake it. Mist the surface lightly with a hose while you work instead of soaking it, wear a dust mask, and keep the pile away from open windows and the pool deck.

How soon can I build on fresh fill?

Light work like laying pavers can start once the surface is compacted and firm underfoot. For slabs, walls or anything structural, many builders wait for a rain or a good soaking and then re-check the grade. If an inspector is involved, ask what compaction proof they want before you schedule the pour.

Is a small order possible for a patch job?

The smallest order is 2 tons, which is enough to fill a good-sized low spot or a long trench. If your need is smaller than that, consider using the extra to level other areas of the yard, since leftover fill rarely goes to waste on a property.

Can I put fill dirt around a tree or shrub?

Keep it thin. Piling more than a few inches against a trunk can smother the roots and invite rot, so pull the dirt back from the base and leave the root flare exposed. For a larger grade change, build a small retaining ring beyond the drip line rather than burying the plant.

What should I do about weeds in fill dirt?

Native-type fill can carry a few seeds, so expect some weeds on the surface. Knock them down early, or cover the area with landscape fabric and a layer of Pea Gravel or mulch if it will not be planted. Deep fill buried under a slab will not sprout anything.

How do I check that the filled area is level?

Set stakes at the corners and run a string line between them at the finished height, then measure down to the dirt in several spots. A 4 foot level on a straight board works for small areas. Rake high spots into low ones before you make the final pass.

Can neighbors split a load?

Yes, and it is a practical way to reach the 2 ton minimum when each of you needs only a little. The load is dropped in one pile, so agree beforehand on who is moving how much and where the pile sits. Orders are placed for a single delivery address, so pick one spot.

Order Fill Dirt →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop