Fill Dirt Delivery in Clovis, CA by the Ton

Fill dirt delivery in Clovis, CA is a direct way to bring a low corner, a sunken walkway edge, or a side strip up to grade. Clovis is about 7 miles from Fresno and has roughly 128,000 residents, and many yards here have uneven spots that need more height before anything else goes in. Lemoore (about 37 miles) and Visalia (about 42 miles) are the next towns out.

Fill dirt delivery in Clovis, CA: common jobs

Most projects fall into a handful of groups. Each one starts with finding the high and low points of the ground you plan to change.

• Raising low spots: a dip in the lawn or along a driveway edge that collects puddles or makes mowing bumpy.
• Garden beds and berms: extra depth for roots in a raised planting area.
• Backfill: refilling a trench for a utility line, or the space beside a new foundation or block wall.
• Building pads: a level base for a shed, an RV pad, or a patio that sits lower than the surrounding ground.
• Driveway shoulders: a soft edge that breaks down under tires and needs height restored beside the pavement.

Whatever the job, shape the finished top so water moves away from the house and off the slab. A surface that tilts toward a foundation keeps collecting water after every rain, so rake the final grade until the fall is clearly outward.

How much fill dirt you need in Clovis

Measure the area in feet, then multiply length by width by the depth you want in inches and divide by 324 to get cubic yards. A cubic yard of fill runs about 2,200 pounds, which makes roughly 1.1 tons per yard. Fill tightens after it is watered and walked on, so the first season can lower the surface a little. Bring the grade up above the height you want and add a margin to the tonnage. The calculator on this site does the arithmetic once you enter the dimensions.

Fill dirt pricing in Clovis

Fill dirt is sold by the ton. The delivered price for your ZIP is calculated live and shown on the page, and that figure includes the trip to your address. Larger orders get a lower rate per ton than smaller ones, so a bigger load is the better value per ton.

Ordering fill dirt in Clovis

The smallest order is 2 tons, so a small patch still needs at least that much. Pick a drop spot before the truck arrives, and check that a loaded truck can reach it without crossing soft ground or tight gates. Plan around the weather where you can, because wet fill is heavy to spread and does not rake well.

Read more about delivery in Clovis on the city page. Projects that need a firm layer under fill can also use #57 Crushed Stone, which is sold by the ton. Asphalt Millings is another option for driveway edges and utility paths, and it is sold by the ton as well.

Before the fill dirt arrives in Clovis

Request a utility locate through 811 before anyone digs a post hole, a trench, or a footing. Crews mark gas, power, water, and phone lines, and a painted mark on the ground is the only reliable way to know what sits below the lot. Then write down the target height at three points: next to the house, along the fence line, and at the low corner. Those three numbers keep the job honest, because a grade that looks right from one spot can run off in another.

Working the fill once it lands in Clovis

Spread the load in sections, and work each one level against the heights you wrote down before you move to the next. Use a rake to break up clumps, then walk the area and check it with a straightedge or a long board. Where a low spot shows under your feet, add a small amount and rake it smooth. Small, repeated passes give a more even result than one heavy dump that you try to correct afterward.

For other cities, start with Fill Dirt in California.

About Fill Dirt

About this material

Fill dirt is earth moved to raise the height of a site, not planting soil meant to grow things by itself. It is brown and weighs about 2,200 pounds per cubic yard, a number that matters when you turn the volume of a project into an order. Contractors and homeowners use it to build up ground that sits below where it needs to be.

This product is sold by the ton. One ton is 2,000 pounds, so a ton covers a little less than one cubic yard at that density. The weight per yard does not change from one order to the next, which means the tonnage follows directly from the volume you measure on site. Fill dirt needs no special handling beyond spreading and raking, and it can be moved with hand tools on small jobs or a compact loader on larger ones.

What Fill Dirt costs in Clovis

Local Clovis yards quote fill dirt by the ton; the delivered number includes fuel, the truck, and the haul. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. A ton of this material spreads across about 98 sq ft when laid 3 inches deep, useful when you are sizing a patio base or a walkway run.

How crews use Fill Dirt in Clovis

In and around Clovis, fill dirt shows up most often on two project types. The most common deployment is erosion control, often in tight urban lots and infill builds in two to three inch lifts. Second on the list is driveway gravel, which we see in dense neighborhoods where curb access is short on partial-truck deliveries. At roughly 127,993 people, the Clovis order mix leans toward 3 to 8 ton residential drops with the occasional 16 ton job for a contractor.

Delivery day in Clovis

A typical Clovis drop is dispatched from the closest yard with a two hour window and a heads-up call once the truck is loaded. Tandem trucks want a 12 ft lane in and out; tri-axles need 14 ft, and both want firm ground at the tipping spot so the load releases cleanly. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

Estimate how much you need