Fill Dirt Delivery in Lawrence, MA
Bulk fill dirt delivered in Lawrence, MA. Brown color.
Starting from $446.89 delivered to Lawrence for 2 tons, our minimum order
Fill dirt delivery in Lawrence, MA is a volume order, and the tonnage you pick drives everything else. Fill dirt is a brown, general-purpose earth material for raising low ground, backing up walls, and building a level base under a shed or patio. It is sold by the ton, so start by working out how many tons the area needs. The statewide overview is on Fill Dirt in Massachusetts, and this page covers the city.
Fill dirt delivery for Lawrence homes and job sites
Lawrence is a city of about 90,000 people in Essex County, and the Merrimack River runs through it. Many houses here have yards that were graded decades ago, so settling and low corners show up often. Newer homes on the edges of town tend to need backfill along the foundation once the concrete has cured, and fill dirt handles that work well.
Methuen is about 3 miles away and Haverhill about 7 miles. Peabody sits roughly 15 miles off, while Nashua and Derry, both in New Hampshire, are each about 17 miles out.
Many Lawrence jobs fit in a single order. A backyard low spot may need only a few tons, while a full pad for a garage can take a larger order in one pass. Either way, the size of the job decides the order, not the other way around.
Best uses for fill dirt in Lawrence
Fill dirt works where the goal is volume and a firm, level surface. Typical jobs include:
- Raising a low corner of a backyard so runoff moves away from the house
- Backfilling a trench or the space beside a foundation wall
- Building up the ground under a shed, patio, or detached garage
- Closing a sunken spot before new sod or paving goes down
Fill dirt is not the layer you plant in. For beds and lawns, top the fill with Premium Screened Topsoil after the grade is set. Mulch is a separate choice for beds and borders, and it is sold by the cubic yard, so it gets its own line on the order.
Working near a structure is a different job from filling open lawn. Keep the new grade a few inches below any siding, sill, or wood post, and let a contractor set the finished height before fill goes against a wall that carries load.
How much fill dirt you need
Measure the area in feet, then the depth you want in inches. For a Lawrence fill dirt job, multiply length by width by depth, then divide by 324 to get cubic yards. Fill dirt weighs about 2,200 lb per cubic yard, or 1.1 tons, so multiply the yardage by 1.1 to estimate tons. Round up, because compacted fill settles lower than it looks when it lands. The calculator on this site runs the same steps if you type in the dimensions.
The smallest order is 2 tons, which covers roughly 1.8 cubic yards of loose fill.
Pricing notes for Lawrence fill dirt
Pricing runs in tons. In Lawrence, the delivered fill dirt price for your ZIP is calculated live and shown before you order. A bigger order drops the rate per ton, so if your estimate sits just under a larger size, check that price before you settle on the smaller one. The shown price already covers delivery.
Delivery and access in Lawrence
For the city-level details on how orders reach Lawrence addresses, see Delivery in Lawrence.
Ordering fill dirt in Lawrence
Enter your Lawrence ZIP, pick tons as the unit, and set the quantity starting at 2. Before the truck arrives, choose a level spot where it can turn around and back in without crossing a septic field or a buried line. A clear, flat drop point saves a lot of shoveling later, so keep the driveway or gate open for the driver.
Have the delivery address, the drop spot, and a tonnage estimate in hand before you start. A rough number is enough to begin, and you can adjust the quantity as you go through the order.
About Fill Dirt
Fill dirt is a brown, general-purpose earth material made for bulk volume rather than planting. Its natural color runs from light brown to darker tan, and the texture is coarser than screened topsoil. A load can include small stones, roots, or bits of organic matter. That is normal for a natural earth product, and it does not stop the material from working as backfill or grade material.
The material is mineral earth with little organic content, which is the main reason it behaves differently from loam. It works well as the bulk under a surface rather than the surface itself. Fill is also a common choice for backfill jobs where the goal is to restore a level grade without bringing in a finished soil, and it arrives as one pile at the drop point for you to spread.
What Fill Dirt costs in Lawrence
In the Lawrence market, fill dirt is sold by the ton and priced at the gate before delivery is added on. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. One ton covers about 98 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons.
How crews use Fill Dirt in Lawrence
Crews working out of Lawrence tend to call for fill dirt on a few repeat jobs each week. The first is erosion control, typically laid in tight urban lots and infill builds with a base lift compacted before the finish course goes on. The second is driveway gravel, which lands here in dense neighborhoods where curb access is short and usually ships as a 4 to 8 ton order. With a population around 89,332, Lawrence pulls a mix of single-truck homeowner orders and contractor full-loads through the season.
Delivery day in Lawrence
On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other Lawrence stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in Lawrence
Price by ZIP- SizeScreened, no size grade
- Density2200 lb/yd³
- ColorDark brown
Price by ZIP- Density2000 lb/yd³
- ColorDark brown
Price by ZIP- Density1000 lb/yd³
- ColorDark brown
Estimate how much you need
Work out your material
A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.
Browse more
Available in nearby cities
Plan your project
Related guides
GUIDEHow Deep Should a Gravel Driveway Be? Layer GuidePractical, field-tested guide: how deep should gravel driveway be. Pulled from real US installer notes and 2026 supplier price data.Read guide →
GUIDEHow Much Does River Rock Cost? By Ton or YardRiver rock cost depends on your ZIP code, order size, and whether you buy by the ton or the cubic yard. Here is how pricing works.Read guide →
GUIDEWhat Size Crushed Stone Goes Under a Concrete SlabMost slabs need 4 to 6 inches of compacted crushed stone underneath. What size crushed stone under a concrete slab needs, and why it matters.Read guide →
GUIDEWhat Is Crushed Stone? Sizes, Uses and Buying BasicsCrushed stone is quarried rock crushed and screened into angular pieces sold by the ton. Here is what it is, how it is graded, and where to use it.Read guide →Frequently Asked Questions
How thick should each layer of fill dirt be?
Spread fill in lifts of about 6 inches, wet each lift lightly, and pack it with a hand tamper or a rented plate compactor before adding the next. Thin layers firm up evenly, while one deep dump tends to sink in dips that only show once the fill has been loaded. Work a deep low spot in several lifts rather than a single pass.
Will fill dirt contain rocks, roots, or trash?
Natural fill can carry small stones, chunks of clay, roots, or bits of organic matter, and the mix changes from load to load. Those pieces rarely matter for backfill or a base. If you plan to set pavers or lay sod by hand, a rake pass over the top few inches catches the bigger pieces before you start.
Do I need a permit to bring in fill dirt in Lawrence?
Permit rules depend on the work, not only on the material. Projects that change grade near a property line or a buried utility often need approval from the city first. Call the local building department before a large order and describe the new grade. A short call beats moving a pile that landed in the wrong place.
What should I do with the pile until I can spread it?
Cover it with a tarp held down at the edges so rain does not carry soil into the street or a storm drain, and keep it clear of the foundation. Spread it as soon as you can, because a pile left on grass smothers the turf underneath. If it has to sit, set it on a hard surface or a sheet of plywood.
What if I order too little fill for the area?
Order a second load, but measure the gap first. Spread and walk over the first load, then check what is still low with a straight board and a tape. Fresh fill settles a little, so the remaining depth is usually smaller than it looked at the start. Look for another low spot nearby that can use any extra from the second order.
Can I order fill dirt for a property I do not live on?
Yes, as long as someone can meet the driver at the drop address and point out the chosen spot. Enter that property's ZIP so the delivered price matches the place the material lands. A quick text with a photo of the spot avoids most confusion.
Is fill dirt a good base for a driveway?
Fill dirt can raise the ground under a driveway, but the surface people drive on is usually a layer of crushed stone. Stone is angular and locks together under traffic, which fill dirt does not do. Use fill for the grade underneath, then add the stone base on top once that fill is firm.
How soon can I walk on freshly placed fill?
Wait until the top lift is packed and feels firm underfoot. Soft fill takes footprints and rolls under a wheel, so test with a short walk before moving equipment or a wheelbarrow onto it. Heavier vehicles should stay off until the full depth has been compacted in its layers. Recheck the surface once it has settled, since a patch that dipped may need a light top-up.