Fill Dirt Delivery in Tacoma, WA
Bulk fill dirt delivered in Tacoma, WA. Brown color.
Starting from $473.31 delivered to Tacoma for 2 tons, our minimum order
Ordering fill dirt delivery in Tacoma, WA
Tacoma buyers can order fill dirt by the ton, with the delivered price calculated live for the ZIP you enter. The smallest order is 2 tons, and the rate per ton falls as the quantity rises. That makes it worth totaling every low spot, trench and pad on the property before you add anything to the cart.
What Tacoma projects use it for
With about 220,000 residents and plenty of hillside lots above the water, Tacoma has no shortage of grading work. Wet winters wash soil out of slopes and leave soft ground behind, and fill dirt is how crews and homeowners put a firm surface back.
- Backfilling behind retaining walls and around new footings.
- Leveling a yard that has sunk after drain or utility work.
- Building a stable pad for a garage, shed or workshop.
- Filling ruts and washouts after heavy rain.
- Bringing an uneven lot closer to level before landscaping.
Nearby cities include Seattle, about 28 miles away, and Redmond, about 36 miles away. For city-specific details, see delivery in Tacoma.
Pairing fill dirt with other materials
Fill dirt builds the base. It does not make a good growing layer. Once the grade is set and compacted, cap it with Premium Screened Topsoil before seeding a lawn, and count that order in tons as well. For a Tacoma planting bed, finish with Mulch and count it in cubic yards.
Keep the two layers separate in your plan. Mixing them makes the compaction uneven, and the topsoil can slump into the lower layer as it dries.
Sizing your order
Measure the length and width in feet, choose a depth in inches, and divide the product by 324 to get cubic yards. A yard of this earth weighs about 1.1 tons, so multiply by 1.1 to get the tons to order. Add a margin, since compacting squeezes the volume down.
Picture a sloped side yard 40 feet long and 10 feet wide that needs 4 inches of fill. That is about 5 cubic yards, or close to 5.5 tons, and a cushion pushes it toward 6. To double-check your own numbers, run them through the calculator and compare.
Site access and getting the load down
On steep Tacoma streets, a truck needs a flat stretch and clear headroom to tip its load. Parked cars and low branches can complicate a drop, so decide on a pile location with a firm surface and good clearance. If the pile will sit through a rainy spell, a tarp stops it from turning to mud and washing onto the street.
Details about the drop, including gates and slopes, are confirmed at checkout. Nothing on this page promises a particular arrival day, so plan the rest of your work around the schedule you are given there.
Planning the work in the right order
Good fill work follows a sequence. Strip any sod, roots and loose debris from the area first, because buried organic matter rots and leaves a hollow behind. Then build the grade up gradually, firming every pass before the next, and check the slope so water runs away from buildings instead of toward them.
On a hillside property, think about where runoff will travel before the first load lands. A small berm or a shallow swale shaped from the same material can carry rain around a new pad. Shaping it at the start of a project, rather than the end, can save a second delivery.
How pricing works
You will not find a price list here, because the number depends on where the material is going. Enter your ZIP and the delivered total appears for that address. Raise or lower the quantity to see how the per-ton rate changes. If you have several jobs staged, combining them into a single larger order is one way to reach the lower rate.
For other cities and the statewide overview, visit Fill Dirt in Washington.
About Fill Dirt
This is a brown, general-purpose earth meant for building ground up and backfilling. In Tacoma, this fill is not a planting soil. It holds together under compaction, so it works where you need a firm layer: low yards, trench lines, the zone behind a retaining wall, or the pad beneath a shed or walkway.
Because it has little organic content, it breaks down slowly and shrinks less than rich soil does. The mix runs from fine particles to small stones, and the look can vary a bit from one load to the next. Treat it as a working material and finish the surface with something else if appearance or growth matters.
It is priced and loaded by weight in tons. A cubic yard comes to roughly 2,200 pounds, so a ton covers a little less than a cubic yard. Wet weather adds water weight, and a rainy Tacoma week can change how heavy a pile feels once you start moving it.
What Fill Dirt costs in Tacoma
In the Tacoma market, fill dirt is sold by the ton and priced at the gate before delivery is added on. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. One ton covers about 98 sq ft at a 3 inch finished depth, so a 400 sq ft driveway pad runs roughly 5 tons.
How crews use Fill Dirt in Tacoma
Crews working out of Tacoma tend to call for fill dirt on a few repeat jobs each week. The first is erosion control, typically laid in tight urban lots and infill builds with a base lift compacted before the finish course goes on. The second is driveway gravel, which lands here in dense neighborhoods where curb access is short and usually ships as a 4 to 8 ton order. With a population around 220,000, Tacoma pulls a mix of single-truck homeowner orders and contractor full-loads through the season.
Delivery day in Tacoma
On the day of the drop, the dispatcher pulls the closest yard, batches your ticket with other Tacoma stops, and sends a window the night before. Tandem-axle dumps need at least 12 ft of clear width and 14 ft overhead to set the bed; tri-axles need 14 ft of clearance on both counts and a level pad to tip safely. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in Tacoma
Price by ZIP- SizeScreened, no size grade
- Density2200 lb/yd³
- ColorDark brown
Price by ZIP- Density2000 lb/yd³
- ColorDark brown
Price by ZIP- Density1000 lb/yd³
- ColorDark brown
Estimate how much you need
Work out your material
A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.
Browse more
Common uses for Fill Dirt in Tacoma
Available in nearby cities
Plan your project
Related guides
GUIDEGravel Size Chart: Pea Gravel to Crushed StoneA gravel size chart showing pea gravel, crushed stone and river rock diameters side by side, so you can match the right size to your project.Read guide →
GUIDEThe Different Types of Gravel and How to ChooseA plain-language guide to the main types of gravel, covering pea gravel, crushed stone, river rock and decomposed granite.Read guide →
GUIDEWhat Are Screenings? A Guide to Crushed Stone FinesScreenings are fine crushed stone used for paver bases, joint fill and walkways. See what screenings are, common types, and mistakes to avoid.Read guide →
GUIDEWhat to Put Under River Rock for Landscaping BedsHere is what to put under river rock landscaping: a compacted base where needed, then landscape fabric, then rock, to stop weeds and settling.Read guide →Frequently Asked Questions
What kind of jobs is fill dirt good for in Tacoma?
It suits backfilling behind retaining walls, leveling low yards, filling washouts after heavy rain and building a firm pad for a shed or garage. It packs down well in layers. It does not suit planting, so add topsoil over it for lawns and gardens.
What is the minimum amount I can order?
Tacoma orders start at 2 tons. Fill dirt is sold by the ton, and the delivered price for your ZIP appears on the page once you enter it. If your project needs less, you can still order the minimum and keep the leftover for later repairs.
How do I check my numbers before ordering?
Measure a sloped Tacoma lot at several points and average the depth, since the high and low ends rarely match. Multiply length, width and that average depth, then compare the result with the calculator. Add a little for compaction, and remember the smallest order is 2 tons.
Does rain affect how I order?
Wet soil weighs more, so a rainy stretch can raise the tonnage slightly for the same volume. More important is placement. Pick a firm spot for the pile, cover it if it will sit, and avoid spreading dirt over standing water or saturated ground.
Can I plant directly into fill dirt?
It is a poor choice for planting because it holds few nutrients and little organic matter. Use it to set the grade, compact it, then spread screened topsoil several inches deep. Grass and garden beds will establish far better on that finished layer.
Why is the price not listed on this page?
The cost depends on the delivery address, so the engine calculates it live for the ZIP you enter. In Tacoma, bigger loads drop the rate per ton. Seeing the delivered figure up front means you can compare quantities without waiting on a quote.
Should I compact the dirt after it is delivered?
Yes, especially after a wet Tacoma season, because saturated ground lets loose fill settle unevenly. Firm each layer in stages with a hand tamper or a rented compactor before adding the next. Anything that will carry weight, like a walkway, slab or shed pad, needs it most.
Where do I tell you about gates or a steep driveway?
Add access notes at checkout. Mention gate width, driveway slope, overhead lines and where the pile should go. Truck drivers use that information to plan the drop, and it helps avoid problems on tight or hilly Tacoma properties.