Pea Gravel Delivery in Manhattan, KS by the Ton
Pea Gravel · Manhattan, KS

Pea Gravel Delivery in Manhattan, KS by the Ton

Bulk pea gravel delivered in Manhattan, KS. Stone size 1/4 - 3/8. Tan / mixed color.

Starting from $722.50 delivered to Manhattan for 2 tons, our minimum order

Weight per yard 2800 lb Density 103.7 lb/cu ft Size 1/4 - 3/8

Manhattan is home to Kansas State University and about 55,000 residents, and pea gravel delivery in Manhattan, KS, is a direct way to get a bulk load of rounded stone for a bed, path or accent strip without hauling bags from a store. The stone is sized 1/4 to 3/8 inch, so it lays flat and reads as one even color across the yard.

Pea Gravel Uses Around Manhattan

Garden beds, side-yard paths and the ground around a patio or grill pad all suit pea gravel. It fills open ground between shrubs, lines a route to a side gate and gives a finished look to spaces that would otherwise be bare dirt or patchy grass.

Color and Texture Notes for Manhattan Beds

Tan and mixed tones make a neutral backdrop for flowers, evergreens and ornamental grasses. Light pieces stand out near a walkway at dusk, while the same mix reads quieter in a shaded corner. The rounded surface gives a soft, even texture that rougher stone does not.

Customers who want the wider picture can compare sizes and uses on the Pea Gravel in Kansas hub.

Along a fence line, a strip of pea gravel makes a tidy edge where mowing is awkward, and a stone strip at a gate keeps mud off the path.

Pricing for Pea Gravel in Manhattan

The price for Manhattan is shown delivered once you enter your ZIP. Bigger loads earn a lower rate per ton, which makes a project that needs several tons better value per ton than a single small order.

Who Orders Pea Gravel in Manhattan

Homeowners finishing a weekend project and small contractors working through several jobs both rely on bulk stone. A homeowner usually needs one load for a single bed, while a contractor often plans a set of smaller orders that each match one client's yard.

Estimating Pea Gravel for a Manhattan Walkway

Take a walkway that runs 30 feet long and 3 feet wide, laid 2 inches deep. Multiplying 30 by 3 by 2 gives 180, and dividing by 324 gives about 0.6 cubic yards. At this stone's weight, that comes to roughly 0.8 tons.

Since the minimum order is two tons, the walkway would be ordered at 2 tons and leave a little extra for the edges. Use the calculator with your own dimensions to check the number before you place the order.

More Manhattan Layouts, Worked in Tons

The same arithmetic as the walkway above gives a feel for how far a few tons stretch across other yards.

Preparing a Manhattan Site for Stone

Remove sod and roots, then dig the area to the depth you need while keeping the surface level from side to side. Stone sits best on a firm base, so tamp any soft spots before the first load arrives. Clear away any buried wire or irrigation lines that the digging might reach.

Pea Gravel Around Trees and Shrubs

A ring of stone can frame a young tree, but keep it a few inches clear of the trunk so the bark stays dry and the stone does not pile against the base. Shrubs look neater inside a stone bed that stops short of the main stems, and a gap around each plant gives it room to grow.

Getting Pea Gravel Delivered to Manhattan

The delivery in Manhattan page explains how orders reach the city and what to expect on the day of your delivery. Plan the drop point before the truck arrives so the stone lands where you can reach it with a wheelbarrow.

Adding Soil or Mulch to a Manhattan Order

Set the amount in tons and the total for your ZIP updates on the page. A bed that needs fresh planting soil can draw on Premium Screened Topsoil, which is priced per ton in Manhattan. Mulch is measured differently, in cubic yards, so the Mulch page is where to size a planted border next to the stone.

About Pea Gravel

This is a decorative pea gravel with small, water-worn pieces that have rounded edges. The stone runs 1/4 to 3/8 inch, and its tan and mixed tones blend with brick, natural stone and most wood finishes.

The product belongs to the decorative category, so it is chosen for looks and surface texture in beds, paths and accent strips. A cubic yard of the material weighs roughly 2,800 pounds. Orders are placed by the ton, which keeps the sales unit consistent from the first quote to the final load.

Round pieces roll a little under foot, so they feel different from angular crushed rock. Its rounded pieces suit many bed shapes. Stone is heavy enough to stay put once the bed is set.

What Pea Gravel costs in Manhattan

Local Manhattan yards quote pea gravel by the ton; the delivered number includes fuel, the truck, and the haul. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. A ton of this material spreads across about 77 sq ft when laid 3 inches deep, useful when you are sizing a patio base or a walkway run.

How crews use Pea Gravel in Manhattan

In and around Manhattan, pea gravel shows up most often on two project types. The most common deployment is patio gravel, often in tight urban lots and infill builds in two to three inch lifts. Second on the list is walkway gravel, which we see in dense neighborhoods where curb access is short on partial-truck deliveries. At roughly 54,700 people, the Manhattan order mix leans toward 3 to 8 ton residential drops with the occasional 16 ton job for a contractor.

Delivery day in Manhattan

A typical Manhattan drop is dispatched from the closest yard with a two hour window and a heads-up call once the truck is loaded. Tandem trucks want a 12 ft lane in and out; tri-axles need 14 ft, and both want firm ground at the tipping spot so the load releases cleanly. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

SAME CATEGORY

Related materials we deliver in Manhattan

Estimate how much you need

Work out your material

Cubic yards0 cu yds
Approximate weight0 tons

A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.

PRODUCT & CITY HUBS

Browse more

NEARBY

Available in nearby cities

TOOLS

Plan your project

KEEP READING

Related guides

Frequently Asked Questions

How much area does one ton of pea gravel cover at 2 inches deep?

One ton covers roughly 0.7 cubic yards of stone, which is about 19 cubic feet. Spread 2 inches deep, that fills an area of about 115 square feet. A bed that is 10 feet by 11 feet would need about one ton, and a larger area needs more tons in proportion.

Can I spread pea gravel myself with a wheelbarrow and rake?

Yes, for a small bed or a short path. Work from the far end toward the drop point, and keep the wheelbarrow on boards so the lawn stays intact. A flat rake levels the stone, and a second pass fixes any thin patches. For a large area, a helper speeds up the spreading and keeps the depth even.

Is pea gravel safe for dogs to walk on?

Smooth, rounded stone is generally comfortable for dogs, but small pieces can get caught between paw pads or picked up in the mouth. Watch dogs that dig, and rinse paws after walks through the bed. A path edged with pavers gives a dog a firm line to follow across the stone.

How does river rock compare with pea gravel?

River rock suits larger accent areas and dry creek beds where the bigger stones add weight to the look.

Can pea gravel go around a hot tub or pool?

Pea gravel can frame a hot tub or pool deck, but stones tend to track onto wet surfaces and get carried into the water. Use a gentle slope away from the water, a border that keeps stone at a distance, and a quick sweep on a regular schedule to keep the deck clear.

Does pea gravel need to be replaced every few years?

Stone does not wear out the way mulch breaks down, so a well-edged bed can last for many years. Most replacement comes from stone that scatters beyond the edge or sinks into soft soil. Top it off when the surface looks thin rather than replacing the whole bed.

Can pea gravel sit right beside a paver patio?

Yes, a paver patio with a stone border makes a clean transition. Keep the top of the stone a little below the paver surface so rain runs off the pavers and does not wash into the gravel. A rigid edge between the two materials stops pieces from creeping onto the patio.

Can I mix pea gravel with mulch in the same bed?

Most people keep them in separate zones, with stone on paths and mulch in the planting areas. Mixing the two makes it hard to rake the stone clean, and mulch can wash into the gravel. A stone border around a mulched bed gives a clean separation and a finished edge.

Order Pea Gravel →
0
    0
    Your Cart
    Your cart is emptyReturn to Shop