Fill Dirt Delivery in Frisco, TX

Frisco keeps growing, and nearly every new lot, patio or play yard there starts with someone needing to raise or level ground. If you want fill dirt delivery in Frisco, TX, this page covers what the material is, how to size an order and how ordering works. Frisco fill dirt is sold by the ton, and the smallest order is 2 tons.

Fill dirt delivery across Frisco

Frisco sits in the Dallas-Fort Worth area with about 220,000 residents, and newer lots often need grade adjustments once owners start adding patios and yards. That makes fill dirt a common order for backyard pads, low spots beside foundations and areas behind new retaining walls. Our delivery in Frisco page explains how trucks reach a residential street.

Fill dirt is a brown, general-purpose earth with no screening for plant growth. It is meant to go under something: a slab, a driveway base, sod, or a layer of better soil. For the layer you will actually plant in, look at Premium Screened Topsoil instead, and plan fill dirt for the bulk underneath.

Best uses for fill dirt in this part of North Texas

• Raising a backyard pad so water runs toward the street rather than the house.
• Filling a trench or utility cut after the pipe or conduit is inspected.
• Building up the base for a shed, a hot tub pad or a retaining wall footing.
• Bringing a sunken area of lawn back to grade before laying sod.
• Backfilling behind a new wall once drainage stone is in place.

Where a project needs a clean, free-draining layer rather than earth, Pea Gravel is the usual partner material for walkways and drainage runs.

How much fill dirt you need

Measure the area in feet, multiply length by width, then by the depth in inches, and divide by 324 to get cubic yards. Our fill dirt weighs roughly 2,200 lb per cubic yard, so one cubic yard is a little over a ton. A 20 by 15 foot pad raised 6 inches comes to about 5.6 cubic yards, or around 6 tons. The calculator does the same math if you would rather type in the numbers.

Clay-heavy Texas soil compacts differently from sandy fill, so add roughly 10 to 15 percent to your total if the dirt will be tamped in lifts. Order in whole tons and round up: a short load means waiting on a second order, and extra dirt is easy to spread on a low corner of the yard.

Pricing and ordering

The price is delivered, so it already includes getting the dirt to your address. Enter your ZIP on the product page and the live engine shows the delivered price for that location. Larger orders get a lower rate per ton, which is why one combined order for a big project beats several small ones.

When you check out, pick a spot the truck can reach and keep overhead lines in mind. Tell the driver where the pile should go, since a delivered load is dumped in one place. If the area is far from the street, plan on wheelbarrows or a skid steer to move it.

Browse the full Fill Dirt in Texas page for other cities we serve in the state.

Nearby cities and neighbors

Many Frisco customers also have projects in Plano, about 8 miles away, and in Lewisville, McKinney, Carrollton and Denton, which sit between 12 and 18 miles out.

Preparing the site before the truck arrives

Scrape the footprint down to bare soil before the load arrives, because any turf left underneath will decay and let the new surface sink in patches. Call 811 before any digging so buried lines are marked, and look up the rules of your homeowners association if you are changing the grade near a property line. Also check whether your lot has a drainage easement, since a fresh pile or a raised edge can block one without you noticing.

Check the forecast too. Dirt spreads and packs far better when it is damp than when it is dusty or soaked, and a hard storm right after delivery can carry an unprotected pile into the gutter. If rain is coming, cover the pile and move it to its final place as soon as the ground dries a little.

Finishing the surface

Once the fill is compacted, rake it smooth, check the slope with a long level or a string line, and top it with whatever the project calls for. Pavers need a leveled stone bed, and a bare pad can simply be left to firm up. Walk the area after the first heavy rain and patch any spots that dipped.

About Fill Dirt

Fill dirt is a plain brown earth used to build up, level and backfill ground. It is not screened for gardening, so it can hold small stones, clay lumps and bits of root. That is fine for what it does: it packs firm under slabs, pavers, driveways and sod, and it costs less to use than a premium soil when the layer will be covered.

It is sold by the ton here, and one cubic yard weighs about 2,200 lb. Moisture changes the weight a little, and wet dirt compacts best, so a light watering while you tamp each layer helps it settle evenly. Spread it in lifts of 4 to 6 inches rather than one deep pour, and expect some settling in the first rains.

Do not use fill dirt as a planting bed for vegetables or flowers. For that, top it with screened topsoil. For drainage layers around pipes or behind walls, use stone instead.

What Fill Dirt costs in Frisco

Local Frisco yards quote fill dirt by the ton; the delivered number includes fuel, the truck, and the haul. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. A ton of this material spreads across about 98 sq ft when laid 3 inches deep, useful when you are sizing a patio base or a walkway run.

How crews use Fill Dirt in Frisco

In and around Frisco, fill dirt shows up most often on two project types. The most common deployment is erosion control, often in tight urban lots and infill builds in two to three inch lifts. Second on the list is driveway gravel, which we see in dense neighborhoods where curb access is short on partial-truck deliveries. At roughly 219,587 people, the Frisco order mix leans toward 3 to 8 ton residential drops with the occasional 16 ton job for a contractor.

Delivery day in Frisco

A typical Frisco drop is dispatched from the closest yard with a two hour window and a heads-up call once the truck is loaded. Tandem trucks want a 12 ft lane in and out; tri-axles need 14 ft, and both want firm ground at the tipping spot so the load releases cleanly. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.

Estimate how much you need