Fill Dirt Delivery in Aurora, CO by the Ton
Bulk fill dirt delivered in Aurora, CO. Brown color.
Starting from $491.08 delivered to Aurora for 2 tons, our minimum order
Aurora spreads across the east side of the Denver metro, and a lot of its yards, lots and driveways need grade changed before anything else goes in. Fill dirt delivery in Aurora, CO is sold by the ton, dumped at the address you enter, and priced for your ZIP before you commit.
Fill dirt delivery in Aurora, CO: what you are buying
Fill dirt is brown, unscreened soil meant for building up low ground, not for growing things. It packs down firm, which is the point. With a city of roughly 386,000 people and plenty of new and aging lots on the east side of the metro, the demand is steady: filling a void, raising a pad, or leveling before a slab or a lawn. You will find a ton weighs 2,000 lb, and this material runs about 2,200 lb to the cubic yard, so a yard is a little over a ton.
Where Aurora projects use it
- Backfill: closing up around a foundation, a retaining wall footing or a trench after utility work.
- Low spots: bringing a sunken corner of the yard up to the surrounding grade so water stops pooling.
- Building pads: raising and leveling ground for a shed, a garage slab or a patio.
- Grading: shaping a slope away from the house before landscaping starts.
- Base layer for lawn: a rough fill underneath, finished later with a layer of Premium Screened Topsoil where grass or beds will grow.
If the job needs a drainage layer or a clean, free-draining surface rather than compacting soil, Pea Gravel is a better match, and it is also sold by the ton in Aurora.
How delivery works for Aurora addresses
You enter the ZIP where the material is going, and the page calculates the delivered price live. There is no phone quote to wait on. Details on drop-off practice for the city are on the page for delivery in Aurora. We do not publish a promised arrival window here, so plan for the truck to need clear access: a straight approach, open overhead space and a firm surface to stand on.
Fill dirt is heavy and a loaded truck does not like soft lawn. Choose a spot on the driveway, the street edge or a hard area near the work, then move it with a wheelbarrow or skid steer once it is down.
Crews working across the metro sometimes order for a second site too. Denver and Centennial are each about 9 miles from Aurora, Thornton is about 12 miles, and Westminster and Lakewood are about 14 miles, so each address is quoted on its own ZIP, not by the city name.
Working out how much you need
Measure the area in feet, then decide on the depth in inches. Aurora jobs use the same math: multiply length by width by depth, then divide by 324 to get cubic yards. Because fill dirt is ordered by weight, multiply those yards by about 1.1 to get tons.
A worked example for a backyard in Aurora: a low corner 30 ft long and 20 ft wide that needs 6 in of fill is 3,600 divided by 324, about 11.1 cubic yards, or around 12 tons. Compacted soil settles, so add an extra 10 to 15 percent. You can also run your own numbers in the calculator and check the result against the formula above.
For Aurora, two tons is the smallest fill dirt order you can place. That covers a small repair, such as one sunken patch or a bit of backfill behind a short wall. Anything larger simply scales up from there.
Pricing notes
The price you see is the delivered price for your ZIP, so it already accounts for getting the load to your Aurora address. Larger orders get a lower rate per ton, which is why one bigger order usually beats several small ones for the same project. Add the amount to the cart and the live total appears before you pay anything. For the statewide picture, see Fill Dirt in Colorado.
Ordering fill dirt for your project
Start with your measurements, convert to tons, enter your ZIP and add the tons to the cart. Then check the live total for your ZIP before you pay.
About Fill Dirt
Fill dirt is a brown, general-purpose soil sold here by the ton. It is not screened to the fine texture of garden soil, so it can hold small stones and some clay, which helps it pack tight under a slab, a walkway or a graded slope. That makes it the usual choice for raising low ground and backfilling holes.
Use it where the surface will be covered or compacted, not where you want to grow plants directly. For lawns and beds, spread a layer of topsoil over the finished fill. For drainage or a clean walking surface, a stone product works better.
A ton is 2,000 lb, and this soil weighs about 2,200 lb per cubic yard, so a cubic yard is a little over one ton. Spread it in layers of a few inches at a time and compact each layer for the firmest result. The delivered price for your ZIP is calculated live on the page, and larger orders get a lower rate per ton. Aurora orders of this fill dirt cannot go below 2 tons.
What Fill Dirt costs in Aurora
Local Aurora yards quote fill dirt by the ton; the delivered number includes fuel, the truck, and the haul. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. A ton of this material spreads across about 98 sq ft when laid 3 inches deep, useful when you are sizing a patio base or a walkway run.
How crews use Fill Dirt in Aurora
In and around Aurora, fill dirt shows up most often on two project types. The most common deployment is erosion control, often in tight urban lots and infill builds in two to three inch lifts. Second on the list is driveway gravel, which we see in dense neighborhoods where curb access is short on partial-truck deliveries. At roughly 386,261 people, the Aurora order mix leans toward 3 to 8 ton residential drops with the occasional 16 ton job for a contractor.
Delivery day in Aurora
A typical Aurora drop is dispatched from the closest yard with a two hour window and a heads-up call once the truck is loaded. Tandem trucks want a 12 ft lane in and out; tri-axles need 14 ft, and both want firm ground at the tipping spot so the load releases cleanly. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in Aurora
Price by ZIP- SizeScreened, no size grade
- Density2200 lb/yd³
- ColorDark brown
Price by ZIP- Density2000 lb/yd³
- ColorDark brown
Price by ZIP- Density1000 lb/yd³
- ColorDark brown
Estimate how much you need
Work out your material
A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.
Browse more
Common uses for Fill Dirt in Aurora
Available in nearby cities
Plan your project
Related guides
GUIDEWhat Size Crushed Stone Goes Under a Concrete SlabMost slabs need 4 to 6 inches of compacted crushed stone underneath. What size crushed stone under a concrete slab needs, and why it matters.Read guide →
GUIDEWhat Is Crushed Stone? Sizes, Uses and Buying BasicsCrushed stone is quarried rock crushed and screened into angular pieces sold by the ton. Here is what it is, how it is graded, and where to use it.Read guide →
GUIDEHow Much Does Gravel Cost? A Practical Pricing GuideHow much does gravel cost and why does it vary? See the real factors behind ton pricing, delivery, and order size before you buy.Read guide →GUIDEGravel Size Chart: Pea Gravel to Crushed StoneA gravel size chart showing pea gravel, crushed stone and river rock diameters side by side, so you can match the right size to your project.Read guide →Frequently Asked Questions
How is fill dirt sold in Aurora?
Aurora fill dirt is sold by the ton. You enter your ZIP, the live price for delivery to that address appears, and larger orders get a lower rate per ton. The smallest order is 2 tons, which suits a small repair or a short stretch of backfill. Bigger jobs just add more tons to the same order.
What is the smallest amount I can order?
The minimum is 2 tons. That is enough to fix one sunken patch of lawn, backfill behind a short wall or build up a small pad. If your measurements come out lower than that, round up to 2 tons, since the order cannot go below it.
How do I convert square footage into tons?
Multiply length in feet by width in feet by depth in inches, and divide by 324 to get cubic yards. Then multiply by about 1.1, since a yard of this soil weighs roughly 2,200 lb. Add 10 to 15 percent for settling, and round up to the next ton.
Can I grow grass directly on fill dirt?
It is better not to. Fill dirt is meant to build and support grade, and it can be hard, rocky or clay-heavy on top. Finish the surface with a few inches of screened topsoil, rake it level and then seed or lay sod. The fill underneath keeps the ground stable.
Where will the truck put the load?
The load arrives as one pile at the address you enter, so think about where that pile will sit while you work. Keep it clear of walkways, storm drains and the street if you can, then move it by wheelbarrow or skid steer into the area being filled, working in layers as you go.
Do I need to compact fill dirt?
Yes, if it will sit under anything heavy. Spread it in layers of about 4 to 6 inches and tamp or roll each one before adding the next. Skipping that step lets the fill settle later, which can crack a slab or leave a dip in the yard.
Why does my price change from one address to another?
The price is calculated for the delivery ZIP, so two addresses in the same metro can differ slightly. Enter the ZIP where the dirt is going and the page shows the delivered price for that spot. The same live check applies to larger and smaller quantities.
Should I use fill dirt, topsoil or gravel?
Choose by the job. Fill dirt is for raising and leveling ground that will be compacted or covered. Topsoil above, stone where water has to move.