Fill Dirt Delivery in Centennial, CO by the Ton
Bulk fill dirt delivered in Centennial, CO. Brown color.
Starting from $491.08 delivered to Centennial for 2 tons, our minimum order
Fill dirt delivery in Centennial, CO
Fill dirt delivery in Centennial, CO is the simplest way to get soil onto a lot that needs it. Centennial is a city of about 108,000 residents on the south side of the Denver metro, and homeowners here often need to build up a low corner, level a patio base, or bring a yard up to grade before sod or a new bed goes in.
Before you order anything, sketch the yard on paper and mark the finished grade at each corner. That sketch tells you where fill is needed and where the existing ground can stay as it is.
Instead of hauling loads in a pickup and dumping them one bucket at a time, a bulk delivery puts the whole job on one truck.
Where Centennial sits in the Denver area
Centennial sits just south of Denver inside the Denver-Aurora-Centennial metro. Aurora is about 9 miles away, Denver about 14, and Lakewood about 15. Arvada and Westminster are each roughly 20 miles out. Centennial readers who want the wider view can open Fill Dirt in Colorado.
Typical Centennial projects for fill dirt
Walk the lot after a storm and mark where water stands. Those spots show which low areas need fill first.
- Filling a low spot or a washout in a backyard
- Raising grade before sod, seed, or a new garden bed goes in
- Building up a sunken patio, walkway, or driveway edge
- Backfilling after a trench, a retaining wall, or foundation work
Fill dirt is not the planting layer, so for beds where plants will grow, a Premium Screened Topsoil product gives roots a better start. When the goal is a loose surface for a play area or a path edge, a Pea Gravel option may suit the look you want better than dirt.
How much fill dirt Centennial projects need
Figure the volume first. Measure the area in feet, convert the depth you want to inches, then multiply length by width by depth and divide by 324. That gives cubic yards. A cubic yard of this material weighs roughly 2,200 pounds, which is about 1.1 tons, so multiply your cubic yard count by 1.1 to find the tonnage. For a quicker check, run the numbers through the calculator before you settle on a total.
Settling takes some of the depth back, so add about 10 percent to the total before you round up to a whole ton.
If the yard is irregular, split it into rectangles, size each one separately, and add the results together. Where the depth changes across an area, measure a few spots and use the average.
Pricing and the two-ton minimum
Fill dirt is priced by the ton. The delivered price for your ZIP is calculated live and shown on this page before you order, so the number you see already includes the delivery. Bigger loads come down in price per ton, which makes a larger order a better fit for a full yard regrade than a few small top-ups. One bigger order generally carries a lower rate per ton than two small ones. In Centennial, the smallest fill dirt order is 2 tons.
Delivery in Centennial
Deliveries to Centennial addresses follow the delivery in Centennial page, which covers how service works in the city. Before the truck arrives, clear the route to the drop spot, note where overhead lines run, and decide whether the pile belongs at the curb, the side yard, or the back gate. A driver can only place the load where the truck can safely stand. Mark the pile spot with stakes or chalk, and keep children and pets away from the area during the drop.
Gates and side yards are often narrower than they look. If the truck will not fit through, the load may need to be dropped at the street, which means more shoveling and a longer spread.
Ordering fill dirt in Centennial
- Pick fill dirt from the material list.
- Enter the tonnage you need for the drop.
- Check the delivery address and drop notes, then place the order.
Have your length, width and depth figures from the sizing section in hand when you choose the tonnage, and look over the ZIP price on the page before you confirm.
About Fill Dirt
About this material
Fill dirt is a loose, brown bulk soil that moves in large volumes. It is the material you bring in to change the shape of ground: to build up a sunken corner, raise a yard toward the level of a walkway, or add body under a pad that needs more height. Because it is dug and screened for bulk work rather than for growing plants, its texture is coarser and denser than a planting mix.
The material arrives loose and is spread by hand or with equipment. Its weight is what matters for planning, so every load is measured and sold in tons, the same unit used on the order form. Expect a dense, earthy product with few roots or organic bits, and plan to spread it in layers so it can be worked into place.
Fill dirt suits contractors and homeowners who need a consistent, affordable base for grading. It pairs well with a topsoil layer on top when a lawn or bed is the end goal, and it is the workhorse for any job that starts with moving earth from one spot to another.
What Fill Dirt costs in Centennial
Around Centennial, fill dirt is quoted by the ton with delivery layered in based on distance from the closest yard. Send your ZIP and load size and we will send back a same-hour quote with the truck rate and the per-ton figure spelled out. Plan on roughly 98 sq ft of coverage per ton at 3 inches deep, which puts a single-car driveway in the 4 to 7 ton bracket.
How crews use Fill Dirt in Centennial
Centennial contractors keep fill dirt on the order sheet for a short list of standard installs. Top of the list is erosion control, where the material is rolled out in tight urban lots and infill builds and screeded to grade. Right behind that is driveway gravel, common in dense neighborhoods where curb access is short and often paired with edging or fabric below the lift. Centennial sits at about 108,418 residents, which means we see steady weekday traffic from landscape crews and weekend pickups from owner-builders.
Delivery day in Centennial
Delivery in Centennial runs out of the nearest pit; you get a two hour arrival window the evening prior and a call when the driver leaves the scale. Plan for 12 ft of clear path for a tandem and 14 ft for a tri-axle, plus a level area at the dump point so the bed lifts straight. Standard lead time on this lane is Mon-Sat, with same-day windows held open for orders that hit the desk before 11 AM and clear payment.
Related materials we deliver in Centennial
Price by ZIP- SizeScreened, no size grade
- Density2200 lb/yd³
- ColorDark brown
Price by ZIP- Density2000 lb/yd³
- ColorDark brown
Price by ZIP- Density1000 lb/yd³
- ColorDark brown
Estimate how much you need
Work out your material
A planning figure, not a guarantee. Order roughly a tenth extra to cover settling and uneven ground.
Browse more
Available in nearby cities
Plan your project
Related guides
GUIDEHow to Clean River Rock and Restore Its ColorLearn how to clean river rock landscaping with rinsing, soap and vinegar methods, plus common mistakes to avoid for a brighter, longer lasting rock bed.Read guide →
GUIDEHow to Lay a Gravel Driveway: Step-by-Step GuidePractical, field-tested guide: how to lay gravel driveway. Pulled from real US installer notes and 2026 supplier price data.Read guide →
GUIDEDoes Gravel Stop Weeds? Honest Answer + What WorksPractical, field-tested guide: does gravel stop weeds. Pulled from real US installer notes and 2026 supplier price data.Read guide →
GUIDEHow Much Gravel Do I Need? Quick Sizing GuidePractical, field-tested guide: how much gravel do i need. Pulled from real US installer notes and 2026 supplier price data.Read guide →Frequently Asked Questions
How should I spread fill dirt so it stays level?
Spread it in lifts rather than one deep pour. Lay down a few inches at a time, rake each layer flat, and tamp it lightly before adding the next. Working in layers keeps soft pockets from forming under the surface. A thin layer of soil on top later lets you correct the final grade without digging out the first layer.
Do I need a permit to add fill dirt to my lot in Centennial?
It depends on how much you change the grade and what the land is used for. Small yard leveling usually needs no approval, but a large regrade, a change near a property line, or work near a structure can. Check with the city's building or planning office, and with your HOA if your neighborhood has one, before the truck is scheduled.
Can I put fill dirt over an existing lawn?
You can, but keep it thin and use the right material. A deep blanket of fill smothers grass and can turn a healthy lawn yellow in a few weeks. For a light topdressing, use screened topsoil, a fraction of an inch at a time. Fill dirt belongs under a lawn that is being rebuilt, not on top of one that is growing.
When is fill dirt a job for a contractor instead of a homeowner?
Call a contractor when the grade change affects a foundation, a slab, or water running toward a house. Those jobs need a plan for how the ground sheds water and where the slope ends. A contractor or engineer can also set the finished grade so the yard drains away from the structure rather than toward it.
Is it safe to stack fill dirt against a fence or a retaining wall?
Not without care. Loose soil pushes sideways against a wall or fence, and a wall that was built to hold only the ground behind it can bow or crack under the extra weight. Keep the pile back from the structure, or build the fill up in stages. For a tall retaining wall, have the design checked by an engineer first.
What should I do with extra fill dirt that is left over?
Spread it thin in a spot that needs a little more height, such as a low patch in the back yard or a planting area that will get topsoil later. Leftover material can also go into a future project, but it should be kept dry and off paved areas so it does not wash into a storm drain while it sits.
Can I spread fill dirt in wet weather?
It is better to wait for a dry spell. Wet fill clumps, compacts unevenly, and makes a mess on the lawn and driveway. Once the material has dried enough to crumble in your hand, rake it out, and avoid walking on a saturated layer because your footprints will press it down into ruts.
Can a driveway or a slab sit on top of fill dirt?
A driveway or slab on fill needs a stable base that was placed and tested for the load it will carry. Loose fill alone is not a substitute for a compacted base course. If a vehicle or a heavy structure will sit on the fill, get a plan from a contractor or engineer who can specify the layers and the testing.